DG406/DG407 19-4729 Rev 5 8/04 Improved, 16-Channel/Dual 8-Channel, CMOS Analog Multiplexers General Description Features Pin-Compatible Plug-In Upgrade for Industry Maxims redesigned DG406 and DG407 CMOS analog Standard DG406/DG407 multiplexers now feature guaranteed matching between Guaranteed Matching Between Channels, 8 (max) channels (8 , max) and flatness over the specified sig- nal range (9 , max). These low on-resistance muxes Guaranteed On-Resistance Flatness, 9 (max) (100 , max) conduct equally well in either direction and Guaranteed Low Charge Injection, 15pC (max) feature guaranteed low charge injection (15pC, max). In Low On-Resistance 100 (max) addition, these new muxes offer low input off-leakage Input Leakage, 5nA (max) at +85C current over temperatureless than 5nA at +85C. Low Power Consumption, 1.25mW (max) The DG406 is a 1 of 16 multiplexer/demultiplexer and Rail-to-Rail Signal Handling the DG407 is a dual 8-channel multiplexer/demultiplex- er. Both muxes operate with a +4.5V to +30V single Digital Input Controls TTL/CMOS Compatible supply and with 4.5V to 20V dual supplies. ESD pro- ESD Protection >2000V per Method 3015.7 tection is guaranteed to be greater than 2000V per Ordering Information Method 3015.7 of MIL-STD 883. These improved muxes are pin-compatible plug-in upgrades for the industry PART TEMP RANGE PIN-PACKAGE standard DG406 and DG407. DG406CJ 0C to +70C 28 Plastic DIP Applications DG406CWI 0C to +70C 28 Wide SO DG406C/D 0C to +70C Dice* Sample-and-Hold Circuits DG406DJ -40C to +85C 28 Plastic DIP Test Equipment DG406EWI -40C to +85C 28 Wide SO Guidance and Control Systems DG406DN -40C to +85C 28 PLCC Communications Systems DG406AK -55C to +125C 28 CERDIP DG406EUI -40C to +85C 28 TSSOP Data-Acquisition Systems Ordering Information continued at end of data sheet. Audio Signal Routing * Contact factory for dice specifications. Pin Configurations Functional Diagrams TOP VIEW V+ V- GND V+ 1 28 D N.C. 2 27 V- S1 S2 N.C. 3 26 S8 S3 S4 S16 4 25 S7 S5 S15 5 24 S6 S6 S7 DG406 S14 6 23 S5 S8 D S9 S13 7 22 S4 S10 S11 S12 8 21 S3 S12 S11 S13 9 20 S2 S14 S10 10 19 S1 S15 S16 S9 18 11 EN GND 17 12 A0 CMOS DECODERS/DRIVERS N.C. 13 16 A1 A3 15 A2 14 A0 A1 A2 A3 EN DG406 16-CHANNEL SINGLE-ENDED MULTIPLEXER DIP/SO/TSSOP Pin Configurations continued at end of data sheet. Functional Diagrams continued at end of data sheet. Maxim Integrated Products 1 For pricing, delivery, and ordering information, please contact Maxim/Dallas Direct at 1-888-629-4642, or visit Maxims website at www.maxim-ic.com.Improved, 16-Channel/Dual 8-Channel, CMOS Analog Multiplexers ABSOLUTE MAXIMUM RATINGS (Voltage Referenced to V-) 28-Pin Wide SO (derate 12.50mW/C above +70C) ...1000mW V+ ............................................................................-0.3V, 44V 28-Pin PLCC (derate 10.53mW/C above +70C) ........842mW GND.........................................................................-0.3V, 25V 28-Pin CERDIP (derate 16.67mW/C above +70C)...1333mW Digital Inputs, S, D (Note 1)....................(V- - 2V) to (V+ + 2V) or 28-Pin TSSOP (derate 12.8mW/C above +70C) ......1025mW 30mA (whichever occurs first) Operating Temperature Ranges Continuous Current (any terminal)......................................30mA DG406/DG407C ...............................................0C to +70C Peak Current, S or D DG406/DG407D ............................................-40C to +85C (pulsed at 1ms, 10% duty cycle max) ..........................100mA DG406/DG407AK ..........................................-55C to +125C Continuous Power Dissipation (T = +70C) Storage Temperature Range .............................-65C to +150C A 28-Pin Plastic DIP (derate 9.09mW/C above +70C) ..727mW Lead Temperature (soldering, 10s) .................................+300C Note 1: Signals on S , D , A0, A1, A2, A3, or EN exceeding V+ or V- are clamped by internal diodes. Limit forward current to max- imum current ratings. Stresses beyond those listed under Absolute Maximum Ratings may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated in the operational sections of the specifications is not implied. Exposure to absolute maximum rating conditions for extended periods may affect device reliability. ELECTRICAL CHARACTERISTICSDual Supplies (V+ = 15V, V- = -15V, GND = 0V, V = +2.4V, V = +0.8V, T = T to T , unless otherwise noted.) AH AL A MIN MAX MIN TYP MAX PARAMETER SYMBOL CONDITIONS UNITS (Note 2) SWITCH Analog Signal Range V (Note 3) -15 +15 V ANALOG T = +25C 60 100 A I = -1.0mA, S Drain-Source On-Resistance R DS(ON) V = 10V D T = T to T 125 A MIN MAX T = +25C 1.5 8 On-Resistance Matching I = -1.0mA, A S R DS(ON) Between Channels V = 10V (Note 4) D T = T to T 10 A MIN MAX T = +25C 1.8 9 I = -1.0mA, A S On-Resistance Flatness R FLAT V = 5V or 0V D T = T to T 12 A MIN MAX T = +25C -0.5 +0.01 +0.5 A V = +10V, D Source-Off Leakage Current I V = 10V, C, D -5 +5 nA S(OFF) S T = T A MIN (Note 5) V = 0V EN to T MAX A -50 +50 T = +25C -1 +0.02 +1 A V = 10V, D V = +10V, DG406 C, D -40 +40 S T = T A MIN V = 0V EN to T MAX A -200 +200 Drain-Off Leakage Current I nA D(OFF) (Note 5) T = +25C -1 +0.02 +1 A V = +10V, D V = 10V, DG407 C, D -20 +20 S T = T A MIN V = 0V EN to T MAX A -100 +100 T = +25C -1 +0.02 +1 A V = 10V, DG406 C, D -40 +40 D T = T A MIN I V = 10V, D(ON) S to T MAX A -200 +200 Drain-On Leakage Current + sequence nA (Note 5) T = +25C -1 +0.02 +1 A I each switch S(ON) on DG407 C, D -20 +20 T = T A MIN to T MAX A -100 +100 2 DG406/DG407