Request DS28C16 Security User Guide Click here for production status of specific part numbers. Evaluates: DS28C16 and DS2477 DS28C16 Evaluation Kit General Description Quick Start The DS28C16 evaluation kit (EV kit) provides the hardware Required Equipment and software necessary to exercise the features of the This section includes a list of recommended equipment DS28C16. The EV system consists of five DS28C16 and and instructions on how to set up the Windows-based PC DS2477 devices in an 8- and 6-pin TDFN package, respec- for the evaluation software. tively, a DS9121DQ+ and DS9121BQ+ evaluation TDFN 2 2 DS9481P-300 USB to 1-Wire/I C adapter (included) socket board, and a DS9481P-300 USB-to-I C/1-Wire adapter. The evaluation software runs under Windows 10, DS9121BQ+ TDFN socket board (included) Windows 8, and Windows 7 operating systems, both 64-bit DS9121DQ+ TDFN socket board (included) and 32-bit versions. It provides a handy user interface to DS28C16Q+ (five included) exercise the features of the DS28C16. DS2477Q+ (five included) Features USB Type A to Micro-USB Type B cable (included) Demonstrates the Features of the DS28C16 PC with a Windows 10, Windows 8, or Windows 7 2 DeepCover SHA-3 I C Authenticator operating system (64 bit or 32 bit) and a spare USB 2 Logs I C Communication to Aid Firmware Designers 2.0 or higher port Understanding of the DS28C16 Download DS28C16 Evaluation Kit Light Version 2 1-Wire/I C USB Adapter Creates a Virtual COM Port software or request full DS28C16 Evaluation Kit on Any PC software. Fully Compliant with USB Specification v2.0 Software Runs on Windows 10, Windows 8, and Windows 7 Ordering Information appears at end of data sheet. Convenient On-Board Test Points and TDFN Socket EV Kit Contents QTY DESCRIPTION 2 5 DS28C16 DeepCover SHA-3 I C Authenticator (8-pin TDFN) 5 DS2477Q+ DeepCover SHA-3 Coprocessor (6-pin TDFN) 1 DS9121BQ+ Socket Board (6-pin TDFN) 1 DS9121DQ+ Socket Board (8-pin TDFN) 1 DS9481P-300 USB to 1-Wire/I2C Adapter 1 USB Type-A to Micro-USB Type-B Cable Windows is a registered trademark and service mark of Microsoft Corporation. 1-Wire and DeepCover are registered trademarks of Maxim Integrated Products, Inc. 319-100509 Rev 0 4/20Evaluates: DS28C16 and DS2477 DS28C16 Evaluation Kit the cavity per the same orientation shown in Figure 1, Procedure and close the burn-in socket. The following steps were performed on a Windows 10 PC 7) Configure the second DS9121BQ+ socket board for to set up the DS28C16 EV kit hardware/software: DS2477 by setting jumpers JB1, JB3, and JB4 per 1) Obtain the DS28C16 Evaluation Kit Setup Figure 3. V1.0.exe file or the latest version. 8) For select flows in the software that use the DS2477 2) In a file viewer double click on DS28C16 Evaluation coprocessor, connect both DS9121DQ+ and Kit Setup V1.0.exe to begin the installation. DS9121BQ+ boards to the DS9481P-300 as 3) Complete all steps of the interactive installation shown in Figure 3. For all other flow, connect only wizard. The software opens by default when the the DS9121DQ+ board containing a DS28C16 to installation is complete. the DS9481P-300 as shown in Figure 2. 4) Open the DS9121DQ+ socket, insert a DS28C16 9) Connect the DS9481P-300 to the PC using a USB into the cavity per the same orientation shown in Type-A to Micro-USB Type-B cable. Figure 1, and close the burn-in socket. 10) Select a flow from the top-left panel in the program 5) Connect the DS9121DQ+ to the DS9481P-300 per and click on the Run button to start the demo as Figure 2. shown in Figure 4. More information about the avail- 6) Open the DS9121BQ+ socket, insert a DS2477 into able flows is available in Table 1. Figure 1. Orientation in Burn-In Socket Maxim Integrated 2 www.maximintegrated.com