ABRIDGED DATA SHEET Evaluates: DS28C36, DS2476 DS28C36 Evaluation System General Description Benefits and Features The DS28C36 evaluation system (EV system) provides Demonstrates the Features of the DS28C36 the hardware and software necessary to evaluate the DeepCover Secure Authenticator DS28C36 and DS2476. The EV system consists of five Demonstrates the Features of the DS2476 DS28C36/DS2476 devices in a 6-pin TDFN package, DeepCover Secure Coprocessor a DS9121AQ+ evaluation TDFN socket board, and a 2 I C and 1-Wire Communication is Logged to Aid 2 DS9481P-300 USB-to-I C/1-Wire adapter. The evalu- Firmware Designers Understanding of the DS2476 ation software runs on Windows 10, Windows 8, and and DS28C36 Windows 7 operating systems (64- and 32-bit versions). 2 The EV system provides a handy user interface to exer- I C/1W-USB Adapter Creates a Virtual COM Port on Any PC cise the features of the DS28C36 and DS2476. Fully Compliant with USB Specification v2.0 Software Runs on Windows 10, Windows 8, and EV System Contents Windows 7 for Both 64-Bit and 32-Bit Versions QTY DESCRIPTION 3.3V 3% 1-Wire Operating Voltage Includes five DS28C36Q+ DeepCover Secure Convenient On-Board Test Points and TDFN Socket 5 Authenticators (6-pin TDFN) Evaluation Software Available by Request DS2476Q+ DeepCover Secure Coprocessor Proven PCB Layout 5 (6-pin TDFN) Fully Assembled and Tested 1 DS9121AQ+ socket board (6-pin TDFN) 2 1 DS9481P-300 USB-to-I C/1-Wire Adapter 1 USB Type-A to USB Mini Type-B cable DS28C36 EV System Ordering Information appears at end of data sheet. Figure 1. DS28C36EV with USB Cable 1-Wire and DeepCover are registered trademarks of Maxim Integrated Products, Inc. Windows is a registered trademark and registered service mark of Microsoft Corporation. 19-8600 Rev 3 7/18ABRIDGED DATA SHEET Evaluates: DS28C36 DS2476 DS28C36 Evaluation System SHA2 Commands is used to evaluate the Detailed Description of Software DS28C36/DS2476 symmetric (SHA-256) security The DS28C36 evaluation program user interface function commands. (Figure 13) has four tabs, General Commands, ECDSA Commands is used to evaluate the SHA2 Commands, ECDSA Commands, and Other DS28C36/DS2476 integrated asymmetric Coprocessor Commands. The Setup section is used (ECC-P256) security function commands. to make the device selections that apply to the General Commands, SHA2 Commands, ECDSA Commands, Other Coprocessor Commands is used to evaluate and Other Coprocessor Commands tabs. Here is a the DS2476 coprocessor that computes any required summary of the function of each tab: HMACs or ECDSA signatures with its additional command set to do any operations on the DS28C36. General Commands is used as the main tool to Note: Grayed out when DS28C36 is selected. evaluate the DS28C36/DS2476 general functions to write or read from the user memory pages, crypto- All tabs include a communications Log area consisting of related memory pages, decrement counter, RNG, 2 an I C Log or 1-Wire Log output. and protection registers. Figure 13. DS28C36 EVKIT Program (Default View Upon Opening) Maxim Integrated 7 www.maximintegrated.com