Request Security User Guide and Developer Software Click here for production status of specific part numbers. Evaluates: DS28C39 and DS2476 DS28C39 Evaluation System General Description Features The DS28C39 evaluation system (EV system) provides Demonstrates the Features of the DS28C39 the hardware and software necessary to exercise the DeepCover ECDSA Authenticator features of the DS28C39. The EV system consists of five Demonstrates the Features of the DS2476 DS28C39/DS2476 devices in a 6-pin TDFN package, a DeepCover Secure Coprocessor DS9121AQ+ evaluation TDFN socket board, a DS9121BQ+ 2 I C Communication Is Logged to Aid Firmware evaluation TDFN socket board, and a DS9481P-300 Designers Understanding of DS28C39 and DS2476 2 USB-to-I C/1-Wire adapter. The evaluation software runs 2 I C USB Adapter Creates a Virtual COM Port on under Windows 10, Windows 8, and Windows 7 operat- ing systems, both 64-bit and 32-bit versions. It provides Any PC a handy user interface to exercise the features of the Fully Compliant with USB Specification v2.0 DS28C39 and DS2476. Software Runs on Windows 10, Windows 8, and Windows 7 for Both 64-Bit and 32-Bit Versions EV Kit Contents 2 3.3V 10% I C Operating Voltage QTY DESCRIPTION Convenient On-Board Test Points, TDFN Socket DS28C39 DeepCover ECDSA Authenticator 5 Evaluation Software Available by Request (6 TDFN) DS2476BQ+ DeepCover Secure Coprocessor 5 Ordering Information appears at end of data sheet. (6 TDFN) 1 DS9121AQ+ Socket Board (6 TDFN) 1 DS9121BQ+ Socket Board (6 TDFN) 2 1 DS9481P-300 USB to 1W/I C Adapter 1 USB Type-A to Micro-USB Type-B Cable 1-Wire and DeepCover are registered trademarks of Maxim Integrated Products, Inc. Windows is a registered trademark and registered service mark of Microsoft Corporation. 319-100395 Rev 0 8/19DS28C39 Evaluation System Evaluates: DS28C39 and DS2476 DS28C39 EV System USB Type A to Micro-USB Type B cable (included) Quick Start PC with a Windows 10, Windows 8, or Windows 7 This section includes a list of recommended equipment operating system (64 bit or 32 bit) and a spare USB and instructions on how to set up the Windows-based PC 2.0 or higher port for the evaluation software. Download DS28C39 EV kit software (light version) Required Equipment or request full DS28C39 EV kit developer software. 2 DS9481P-300 USB to 1-Wire/I C adapter (included) Note: In the following sections, software-related items are DS9121AQ+ TDFN socket board (one included) identified by bolding. Text in bold refers to items directly DS9121BQ+ TDFN socket board (one included) from the EV kit software. Text in bold and underlined refers to items from the Windows operating system. DS28C39Q+ (five devices included) DS2476BQ+ (five devices included) Maxim Integrated 2 www.maximintegrated.com