DS28C50EVKIT# Analog Devices

Request Security User Guide and Full Developer Software Click here for production status of specific part numbers. Evaluates: DS28C50 and DS2477 DS28C50 Evaluation Kit General Description Quick Start The DS28C50 evaluation kit (EV kit) provides the hardware Required Equipment and software necessary to exercise the features of the This section includes a list of recommended equipment DS28C50 and DS2477. The EV system consists of five and instructions on how to set up the Windows-based PC DS28C50 and DS2477 devices in a 6-pin TDFN package, for the evaluation software. two DS9121BQ+ evaluation TDFN socket boards, and a 2 2 DS9481P-300 USB to 1-Wire/I C adapter (included) DS9481P-300 USB-to-I C/1-Wire adapter. The evalua- tion software runs on Windows 10 and Windows 7 operat- DS9121BQ+ TDFN socket board (two included) ing systems. It provides a handy user interface to exercise DS28C50Q+ (five devices included) the features of the DS28C50 and DS2477. Note that the DS2477Q+ (five devices included) evaluation software described herein is the lite version that is downloadable from Maxims website. To request the full USB Type A to Micro-USB Type B cable (included) developer version, click the link at the top of the page. PC with a Windows 10 or Windows 7 operating system and a spare USB 2.0 or higher port Features Download DS28C50 EV kit software Demonstrates the Features of the DS28C50 (lite version) or request full DS28C50 EV kit 2 DeepCover SHA3 I C Authenticator developer software. Demonstrates the Features of the DS2477 Note: In the following sections, software-related items are DeepCover SHA3 Secure Coprocessor identified by bolding. Text in bold refers to items directly 2 I C Communication Is Logged to Aid Firmware from the EV kit software. Text in bold and underlined Designers Understanding of DS28C50 and DS2477 refers to items from the Windows operating system. 2 1-Wire/I C USB Adapter Creates a Virtual COM Port on Any PC Fully Compliant with USB Specification v2.0 Software Runs on Windows 10 and Windows 7 Convenient On-Board Test Points, TDFN Socket EV Kit Contents Ordering Information appears at end of data sheet. QTY DESCRIPTION 2 5 DS28C50Q+ DeepCover SHA3 I C Authenticator 5 DS2477Q+ DeepCover SHA3 Secure Coprocessor 2 DS9121BQ+ TDFN Socket Board 2 1 DS9481P-300 USB to 1-Wire/I C Adapter 1 USB Type-A to Micro-USB Type-B Cable DeepCover and 1-Wire are registered trademarks of Maxim Integrated Products, Inc. Windows is a registered is a registered trademark and service mark of Microsoft Corporation. 319-100442 Rev 0 9/19DS28C50 Evaluation Kit Evaluates: DS28C50 and DS2477 3) The DS9481P-300 driver is required to communi- Hardware Setup and Driver Installation cate through the USB through a virtual COM port. Quick Start If DS9481 device driver is not installed: The following steps were performed on a Windows 10 PC a) Open folder DS9481 driver installer (Figure 1). to set up the DS28C50 EV kit hardware/software: b) Run dpinst.exe (Figure 2). 1) Obtain and unpack the DS28C50EVkit Lite.zip file , c) Click Next on the Device Driver Installation or the latest version. Wizard window (Figure 3). 2) Unplug any Maxim adapters before installing software. d) Click Finish on the Device Driver Installation Wizard window (Figure 4). 4) Plug in the DS9481 adapter. Figure 1. File Viewer with DS28C50 Installer and DS9481 Device Driver Installer Figure 2. File Viewer with DS9481 Device Driver Installation File Maxim Integrated 2 www.maximintegrated.com