Request DS28E16 Security User Guide Click here for production status of specific part numbers. Evaluates: DS28E16 and DS2477 DS28E16 Evaluation Kit General Description Quick Start The DS28E16 evaluation kit (EV kit) provides the hard- Required Equipment ware and software necessary to exercise the features of This section includes a list of recommended equipment the DS28E16. The EV system consists of five DS28E16 and instructions on how to set up the Windows-based PC and DS2477 devices in a 6-pin TDFN package, two for the evaluation software. DS9121BQ+ evaluation TDFN socket boards, and a 2 2 DS9481P-300 USB to 1-Wire/I C adapter (included) DS9481P-300 USB-to-I C/1-Wire adapter. The evalu- ation software runs under Windows 10, Windows 8, and DS9121BQ+ TDFN socket board (two included) Windows 7 operating systems, both 64-bit and 32-bit ver- DS28E16Q+ (five included) sions. It provides a handy user interface to exercise the DS2477Q+ (five included) features of the DS28E16. USB Type A to Micro-USB Type B cable (included) Features PC with a Windows 10, Windows 8, or Windows 7 Demonstrates the Features of the DS28E16 operating system (64 bit or 32 bit) and a spare USB DeepCover SHA-3 1-Wire Authenticator 2.0 or higher port 2 Logs 1-Wire/I C Communication to Aid Firmware Download DS28E16 Evaluation Kit Light Version Designers Understanding of the DS28E16 software or request full DS28E16 Evaluation Kit 2 1-Wire/I C USB Adapter Creates a Virtual COM Port software. on Any PC Fully Compliant with USB Specification v2.0 Software Runs on Windows 10, Windows 8, and Ordering Information appears at end of data sheet. Windows 7 Convenient On-Board Test Points and TDFN Socket EV Kit Contents QTY DESCRIPTION 5 DS28E16 DeepCover SHA-3 1-Wire Authenticator (6-pin TDFN) 5 DS2477Q+ DeepCover SHA-3 Coprocessor (6-pin TDFN) 2 DS9121BQ+ Socket Board (6-pin TDFN) 1 DS9481P-300 USB to 1-Wire/I2C Adapter 1 USB Type-A to Micro-USB Type-B Cable Windows is a registered trademark and service mark of Microsoft Corporation. 1-Wire and DeepCover are registered trademarks of Maxim Integrated Products, Inc. 319-100338 Rev 0 3/19Evaluates: DS28E16 and DS2477 DS28E16 Evaluation Kit DS2477 into the cavity per the same orientation Procedure shown in Figure 1, and close the burn-in socket. The following steps were performed on a Windows 10 PC 7) Configure the second DS9121BQ+ socket board for to set up the DS28E16 EV kit hardware/software: DS2477 by setting jumpers JB1, JB3, and JB4 per 1) Obtain the DS28E16 Evaluation Kit Setup Figure 3. V1.0.0.exe file or the latest version. 8) For select flows in the software that use the DS2477 2) In a file viewer double click on DS28E16 Evaluation coprocessor, connect both DS9121BQ+ boards to Kit Setup V1.0.0.exe to begin the installation. the DS9481P-300 as shown in Figure 3. For all 3) Complete all steps of the interactive installation other flow, connect only the first DS9121BQ+ board wizard. The software opens by default when the containing a DS28E16 to the DS9481P-300 as installation is complete. shown in Figure 2. 4) Open the first DS9121BQ+ socket, insert a DS28E16 9) Connect the DS9481P-300 to the PC using a USB into the cavity per the same orientation shown in Type-A to Micro-USB Type-B cable. Figure 1, and close the burn-in socket. 10) Select a flow from the top-left panel in the program 5) Configure the first DS9121BQ+ socket board for and click on the Run button to start the demo as DS28E16 by setting jumper JB5 per Figure 2. shown in Figure 4. More information about the avail- 6) Open the second DS9121BQ+ socket, insert a able flows is available in Table 1. Figure 1. Orientation in Burn-In Socket Maxim Integrated 2 www.maximintegrated.com