Evaluates: DS28E36 and DS2476 DS28E36 Evaluation System General Description Features The DS28E36 evaluation system (EV system) provides Demonstrates the Features of the DS28E36 the hardware and software necessary to evaluate the DeepCover Secure Authenticator DS28E36 and DS2476. The EV system consists of Demonstrates the Features of the DS2476 five DS28E36/DS2476 devices in a 6-pin TDFN pack - DeepCover Secure Coprocessor age, a DS9121AQ+ evaluation TDFN socket board, 2 I C and 1-Wire Communication is Logged to Aid 2 and a DS9481P-300 USB-to-I C/1-Wire adapter. The Firmware Designers Understanding of the DS2476 evaluation software runs on Windows 10, Windows 8, and DS28E36 and Windows 7 operating systems (64- and 32-bit 2 versions). The EV system provides a handy user interface I C/1W-USB Adapter Creates a Virtual COM Port on Any PC to exercise the features of the DS28E36 and DS2476. Fully Compliant with USB Specification v2.0 EV System Contents Software Runs on Windows 10, Windows 8, and QTY DESCRIPTION Windows 7 for Both 64-Bit and 32-Bit Versions Includes five DS28E36Q+ DeepCover Secure 3.3V 3% 1-Wire Operating Voltage 5 Authenticators (6-pin TDFN) Convenient On-Board Test Points and TDFN Socket DS2476Q+ DeepCover Secure Coprocessor Evaluation Software Available by Request 5 (6-pin TDFN) Proven PCB Layout 1 DS9121AQ+ socket board (6-pin TDFN) Fully Assembled and Tested 2 1 DS9481P-300 USB-to-I C/1-Wire Adapter 1 USB Type-A to USB Mini Type-B cable DS28E36 EV System Ordering Information appears at end of data sheet. Figure 1. DS28E36EV with USB Cable 1-Wire and DeepCover are registered trademarks of Maxim Integrated Products, Inc. Windows is a registered trademark and registered service mark of Microsoft Corporation. 319-100113 Rev 0 12/17Evaluates: DS28E36 and DS2476 DS28E36 Evaluation System Note: In the following sections, software-related items are Quick Start identified by bolding. Text in bold refers to items directly This section is intended to give the DS28E36 evaluator a from the EV system software. Text in bold and under- list of recommended equipment and instructions on how lined refers to items from the Windows operating system. to set up a Windows-based computer for the evaluation software. Hardware Setup and Driver Installation Quick Start Procedure Recommended Equipment The EV system is fully assembled and tested. The follow- 2 DS28E36 EV system USB-to-I C adapter with ing steps were performed on a Windows 7 PC to set up DS2476 secure coprocessor (included) the DS28E36EVKIT hardware/software: DS9120AQ+ TDFN socket board (included) 1) Obtain and unpack the zip of DS28E36 EVKIT Five DS28E36Q+ (included, respectively) REV 1 6 Light version.zip or newer version. Five DS2476Q+ (included) 2) In a file viewer, double click on DS28E36 Installer. msi to begin the installation (Figure 2). USB Type A to Micro-USB Type B cable (included) 3) The Setup Wizard opens. Click on Next, as shown in Computer with a Windows 10, Windows 8, or Figure 3. Windows 7 operating system (64- or 32-bit) and a 4) Read and check the box for the license agreement spare USB 2.0 or higher port and click on Next again to install to the selected Download DS28E36 EV kit software (light version) or folder (Figure 4). request full DS28E36 EV kit developer software. Figure 2. File Viewer Maxim Integrated 2 www.maximintegrated.com