Request DS28E40 Security Users Guide Click here to ask about the production status of specific part numbers. Evaluates: DS28E40 DS28E40 Evaluation Kit General Description Features The DS28E40 evaluation system (EV system) provides Demonstrates the Features of the DS28E40 the hardware and software necessary to evaluate the DeepCover Secure Authenticator features of the DS28E40. The EV system consists of five 1-Wire Communication Is Logged to Aid Firmware DS28E40ATB/VY+ devices in a 10-pin TDFN package, Designers Understanding of the DS28E40 a DS9121ATB+ evaluation TDFN socket board, and a 2 1-Wire/I C USB Adapter Creates a Virtual COM Port 2 DS9481P-300 USB-to-I C/1-Wire adapter. The evalua- on Any PC tion software runs under Windows 10, Windows 8, and Fully Compliant with USB Specification v2.0 Windows 7 operating systems, both the 64-bit and 32-bit Software Runs on Windows 10, Windows 8, and versions. It provides a handy user interface to exercise Windows 7 for Both 64-Bit and 32-Bit Versions the features of the DS28E40. 3.3V 3% 1-Wire Operating Voltage Ordering Information appears at end of data sheet. Convenient On-Board Test Points, TDFN Socket Evaluation Software Available by Request EV Kit Contents DS28E40 EV System QTY DESCRIPTION DS28E40ATB/VY+ DeepCover Secure 5 Authenticator (10 TDFN) 1 DS9121ATB+ Socket Board (10 TDFN) 2 1 DS9481P-300 USB-to-I C/1-Wire 1 USB Type-A to Micro-USB Type-B Cable 1-Wire and DeepCover are registered trademarks of Maxim Integrated Products, Inc. Windows is a registered trademark of Microsoft Corporation. 319-100586 Rev 2 3/21Evaluates: DS28E40 DS28E40 Evaluation Kit Note: In the following sections, software-related items are Quick Start identified by bolding. Text in bold refers to items directly This section includes a list of recommended equipment from the EV kit software. Text in bold and underlined and instructions on how to set up the Windows-based PC refers to items from the Windows operating system. for the evaluation software. Hardware Setup and Driver Installation Required Equipment Quick Start 2 DS9481P-300 USB-to-I C/1-Wire adapter (included) The following steps were performed on a Windows 10 PC DS9121ATB+ socket board (included) to set up the DS28E40 EV kit hardware/software: DS28E40ATB/VY+ (five devices included) 1) Obtain and unpack the DS28C40 DS28E40 Evalua- USB Type A to Micro-USB Type B cable (included) tion Kit Lite Version Setup file or the latest version. PC with a Windows 10, Windows 8, or Windows 7 2) In a file viewer ( Figure 1), double click on the operating system (64 bit or 32 bit) and a spare USB DS28C40 DS28E40 Evaluation Kit Lite Ver- 2.0 or higher port sion Setup V2 file to begin the installation. Download DS28E40 EV kit software (light version) or 3) The setup wizard opens click Next as shown in request full DS28E40 EV kit developer software Figure 2. Figure 1. File Viewer Maxim Integrated 2 www.maximintegrated.com