Request DS28S60 Security Users Guide Click here to ask about the production status of specific part numbers. Evaluates: DS28S60 DS28S60 Evaluation Kit General Description Features The DS28S60 evaluation system (EV system) provides Demonstrates the Features of the DS28S60 the hardware and software necessary to exercise the DeepCover Secure Coprocessor features of the DS28S60. The EV system consists SPI Communication is Logged to Aid Firmware of five DS28S60Q+ devices in a 12-pin TDFN pack- Designers Understanding of DS28S60 age, a DS9121E evaluation TDFN socket board, and a 2 SPI/1-Wire/I C USB Adapter Creates a Virtual COM 2 DS9482P USB-to-I C/SPI/1-Wire adapter. The evalu- Port on Any PC ation software runs under Windows 10, Windows 8, Fully Compliant with USB Specification v2.0 and Windows 7 operating systems, both 64-bit and 32-bit Software Runs on Windows 10, Windows 8, and versions. It provides a handy user interface to exercise Windows 7 for Both 64-Bit and 32-Bit Versions the features of the DS28S60. 3.3V 3% Operating Voltage Ordering Information appears at end of data sheet. Convenient On-Board Test Points, TDFN Socket Evaluation Software Available by Request EV Kit Contents DS28S60 EV System QTY DESCRIPTION DS28S60Q+ DeepCover SPI Secure Authenticator 5 (12 TDFN) 1 DS9121EQ+ Socket Board (12 TDFN) 2 1 DS9482P USB to I C/SPI/1-Wire Adapter 1 USB Type-A to Micro-USB Type-B Cable 1-Wire and DeepCover are registered trademarks of Maxim Integrated Products, Inc. Windows is a registered trademark of Microsoft Corporation. 319-100552 Rev 1 7/20Evaluates: DS28S60 DS28S60 Evaluation Kit Note: In the following sections, software-related items are Quick Start identified by bolding. Text in bold refers to items directly This section includes a list of recommended equipment from the EV kit software. Text in bold and underlined and instructions on how to set up the Windows-based PC refers to items from the Windows operating system. for the evaluation software. Hardware Setup and Driver Installation Required Equipment Quick Start 2 DS9482P USB to I C/SPI/1-Wire Adapter (included) The following steps were performed on a Windows 10 PC DS9121EQ+ TDFN socket board (included) to set up the DS28S60 EV kit hardware/software: DS28S60Q+ (five devices included) 1) Obtain and unpack the DS28S60 Evaluation USB Type A to Micro-USB Type B cable (included) Kit Lite Version Setup V1 0 0 file or the latest version. PC with a Windows 10, Windows 8, or Windows 7 operating system (64 bit or 32 bit) and a spare USB 2) In a file viewer (Figure 1), double click on the 2.0 or higher port DS28S60 Evaluation Kit Lite Version Setup Download DS28S60 EV kit software (light version) or V1 0 0 .exe file to begin the installation. request full DS28S60 EV kit developer software 3) The setup wizard opens click Next as shown in Figure 2. Figure 1. File Viewer Maxim Integrated 2 www.maximintegrated.com