19-4870 8/09 DS9093A, DS9093F, DS9093N iButton Key Ring Mounts www.maxim-ic.com FEATURES KEY RING MOUNTS Low-cost key ring mounts that hold an DS9093F iButton for thumbpad applications. Key ring mount versions: DS9093A snap-in angled fob for use with F5 MicroCan . DS9093F snap-in fob for use with F5 MicroCan. DS9093N angled fob for use with F5 MicroCan. ORDERING INFORMATION DS9093A+ black DS9093AB+ blue DS9093AY+ yellow DS9093AR+ red DS9093AG+ green DS9093F+ black DS9093N+ black +Denotes a lead(Pb)-free/RoHS-compliant product. DS9093A DS9093N iButton and MicroCan are registered trademarks of Maxim Integrated Products, Inc. 1 of 3 DS9093A/F/N DESCRIPTION The DS9093F plastic snap-in fob offers the simplest way to mount an iButton for applications that require only momentary contact. The fob can be attached to a key ring for carrying. Do not apply solvents or adhesives to this fob. This might affect the mechanical strength and reliability. The DS9093N angled fob is an alternate way to mount an iButton for applications that require only momentary contact. Due to the different mounting technique, the DS9093N can be used with the F5 MicroCan only. The iButton is inserted into this fob by press-fitting. For permanent mount, the iButton can be locked by a DS9093RA Lock Ring. The DS9093A is very similar to the DS9093N. It has about the same size as the DS9093N and can be used with the F5 MicroCan only. The iButton is inserted by press-fitting the flange of the MicroCan into the cavity of the fob. In contrast to the DS9093N, no additional parts are needed for permanent mounting. The DS9093A is available in black, blue, green, red, and yellow. 2 of 3