EVAL-ADM3063EEBZ User Guide UG-1520 One Technology Way P.O. Box 9106 Norwood, MA 02062-9106, U.S.A. Tel: 781.329.4700 Fax: 781.461.3113 www.analog.com Evaluating the ADM3063E 3.0 V to 5.5 V, 12 kV IEC ESD Protected, 500 kbps, RS-485 Transceiver FEATURES GENERAL DESCRIPTION Easy evaluation of ADM3063E 500 kbps, RS-485 transceiver The EVAL-ADM3063EEBZ allows quick and easy evaluation of Board layout for standard, full-duplex, RS-485 footprint the ADM3063E 500 kbps, RS-485 transceiver with standard, 14-lead SOIC, ADM3063EBRZ 14-lead NSOIC footprint. The evaluation board allows the input Power/ground connections through screw terminal block and output functions to be exercised without external components. 3.0 V to 5.5 V operating voltage range on VCC Screw terminal blocks provide convenient connections for power IEC61000-4-2 ESD protection on the RS-485 A, B, Y and Z bus and ground, digital input and output, and RS-485 signals. The pins evaluation board can be powered by a standard configurable 12 kV contact discharge and 12 kV air discharge bench power supply within the 3.0 V to 5.5 V range. Screw terminal blocks for logic input/output and RS-485 signals The EVAL-ADM3063EEBZ evaluation board has a footprint for Jumper-selectable enable/disable for RE and DE the ADM3063EBRZ full duplex, RS-485 transceiver in a 14-lead Test points for measuring all signals SOIC package. Resistors and footprints for termination and biasing networks For full details, see the ADM3063E data sheet, which must be EVALUATION KIT CONTENTS used in conjunction with this user guide when using the EVAL- EVAL-ADM3063EEBZ evaluation board ADM3063EEBZ evaluation board. ADDITIONAL EQUIPMENT NEEDED Oscilloscope Signal generator 3 V to 5 V supply EVALUATION BOARD PHOTOGRAPH Figure 1. PLEASE SEE THE LAST PAGE FOR AN IMPORTANT WARNING AND LEGAL TERMS AND CONDITIONS. Rev. 0 Page 1 of 8 20143-001UG-1520 EVAL-ADM3063EEBZ User Guide TABLE OF CONTENTS Features .............................................................................................. 1 Input and Output Connections ...................................................3 Evaluation Kit Contents ................................................................... 1 Other Board Components............................................................3 Additional Equipment Needed ....................................................... 1 Full-Duplex RS-485 Transceivers Loopback Test .....................4 General Description ......................................................................... 1 IEC 61000-4-2 Electrostatic Discharge (ESD) Protection to 12 kV (Contact) and 12 kV (Air) ...........................................4 Evaluation Board Photograph ......................................................... 1 Evaluation Board Schematics and Artwork ...................................5 Revision History ............................................................................... 2 Ordering Information .......................................................................8 Evaluation Board Hardware ............................................................ 3 Bill of Materials ..............................................................................8 Setting Up the Evaluation Board ................................................ 3 REVISION HISTORY 4/2019Revision 0: Initial Version Rev. 0 Page 2 of 8