UMFT221XA-01 FTDI

UMFT220XA Datasheet Version 1.4 Document Reference No.: FT 000517 Clearance No.: FTDI 267 Future Technology Devices International Datasheet UMFT220XA USB to 4-bit SPI/FT1248 Development Module UMFT220XA is a USB to 4-bit SPI/FT1248 DIP module with a 0.3 row pitch. 1.1 Features 1 Introduction The UMFT220XA is a development module for The UMFT220XA is fitted with a FT220XQ all the FTDIs FT220XQ, one of the devices from FTDIs features of the FT220X can be utilized with the range of USB interface bridging integrated circuit UMFT220XA. For a full list of the FT220Xs features devices. FT220X is a USB to 4-bit SPI/FT1248 please see the FT220X datasheet which can be found (only up to 4 bit wide) interface with a battery by clicking here. charger detection feature, which can allow In addition to the features listed in the FT220X batteries to be charged with a higher current datasheet, the UMFT220XA has the following features: from a dedicated charger port (without the FT220X being enumerated). In addition, Small PCB assembly module designed to fit a asynchronous and synchronous bit bang interface standard 7.62mm (0.3) wide 16 pin DIP socket. modes are available. The internally generated Pins are on a 2.54mm (0.1) pitch. clock (6MHz, 12MHz and 24MHz) can be brought out on the CBUS pin to be used to drive a On board USB mini-B socket allows module to be microprocessor or external logic. connected to a PC via a standard A to mini-B USB cable. The UMFT220XA is a module which is designed to plug into a standard 0.3 wide 16 pin DIP socket. Functionally configurable using solder links. The All components used, including the FT220XQ are default solder links setup enables the module to Pb-free (RoHS compliant). function without peripheral wires or application board. Other configurations enable external power supply options and variation of logic reference levels. Neither the whole nor any part of the information contained in, or the product described in this manual, may be adapted or reproduced in any material or electronic form without the prior written consent of the copyright holder. This product and its documentation are supplied on an as-is basis and no warranty as to their suitability for any particular purpose is either made or implied. Future Technology Devices International Ltd will not accept any claim for damages howsoever arising as a result of use or failure of this product. Your statutory rights are not affected. This product or any variant of it is not intended for use in any medical appliance, device or system in which the failure of the product might reasonably be expected to result in personal injury. This document provides preliminary information that may be subject to change without notice. No freedom to use patents or other intellectual property rights is implied by the publication of this document. Future Technology Devices International Ltd, Unit 1, 2 Seaward Place, Centurion Business Park, Glasgow G41 1HH United Kingdom. Scotland Registered Company Number: SC136640 Copyright Future Technology Devices International Limited 1 UMFT220XA Datasheet Version 1.4 Document Reference No.: FT 000517 Clearance No.: FTDI 267 Table of Contents 1 Introduction .................................................................... 1 1.1 Features .................................................................................... 1 2 Driver Support ................................................................ 3 3 Ordering Information & TID ............................................ 4 4 UMFT220XA Signals and Configurations .......................... 5 4.1 UMFT220XA Pin Out .................................................................. 5 4.2 Signal Descriptions ................................................................... 6 4.3 CBUS Signal Options ................................................................. 7 5 Module Configurations .................................................... 8 5.1 Solder Link Configuration Options ............................................. 8 5.2 Solder Link Modfications ........................................................... 8 5.3 BUS Powered Configuration ...................................................... 9 5.4 Self Powered Configuration .................................................... 10 5.5 USB Bus Powered with Power Switching Configuration .......... 11 5.6 Variable IO Voltage Supply ..................................................... 12 5.7 3.3V Voltage Supply ................................................................ 13 5.8 Configuring the MTP ROM ....................................................... 13 5.9 Module Dimensions ................................................................. 14 5.10 IC Package Markings ............................................................... 14 6 UMFT220XA Module Circuit Schematic .......................... 15 7 Internal MTP ROM Configuration ................................... 16 8 Contact Information ...................................................... 17 Appendix A References ................................................... 18 Document References ..................................................................... 18 Acronyms and Abbreviations ........................................................... 18 Appendix B - List of Figures and Tables ............................. 19 List of Figures ................................................................................. 19 List of Tables ................................................................................... 19 Appendix C Revision History ........................................... 20 Copyright Future Technology Devices International Limited 2