UMFT201XB, UMFT220XB and UMFT230XB Datasheet Version 1.3 Document Reference No.: FT 000506 Clearance No.: FTDI 272 Future Technology Devices International Ltd Datasheet UMFT201XB, UMFT220XB, UMFT230XB Breakout Modules 2 USB to I C/UART/FT1248 breakout modules 1 Introduction 1.1 Features UMFT201XB, UMFT220XB, and UMFT230XB This module is a breakout board with a low profile. It breakout modules utilize FTDIs FT201XQ, converts USB2.0 Full-Speed to a serial interface and FT220XQ, and FT230XQ chips, respectively, to connects the serial signals to a 2.54mm (0.1) pitch convert USB to serial or parallel interfaces. These 10pin female receptacle. The boards do not use a USB modules support the following popular interfaces: connector, but instead the modules plug directly into the 2 USB host connector and the pads of the PCB makes - UMFT201XB bridges from USB to I C IC. electrical contact with the electrical contacts of the USB - UMFT220XB bridges from USB to a user chosen, connector. parallel bit interface, FTDIs FT1248/SPI. Note: All serial interfaces on these modules operate at +3.3V 2 out of the 4 I/0 lines are available for this voltage levels, however all I/Os are 5V tolerant. module. - UMFT230XB bridges from USB to UART IC. 2 Driver Support Royalty-Free VIRTUAL COM PORT (VCP) Royalty-Free D2XX Direct Drivers (USB Drivers DRIVERS for: + DLL S/W Interface): Windows 10 32,64-bit Windows 10 32,64-bit Windows 8 / 8.1 32,64-bit Windows 8 / 8.1 32,64-bit Windows 7 32,64-bit Windows 7 32,64-bit Windows Vista Windows Vista Windows XP 32,64-bit Windows XP 32,64-bit Windows XP Embedded Windows XP Embedded Windows CE.NET 4.2-5.2, 6.0/7.0, 2013 Windows CE.NET 4.2, 5.0 and 6.0 MAC OS-X MAC OS OS-X Linux 3.2 and greater Linux 3.0 and greater Android Android The drivers listed above are all available to download for free from www.ftdichip.com. Various 3rd Party Drivers are also available for various other operating systems - visit www.ftdichip.com for details. Copyright Future Technology Devices International Limited 1 UMFT201XB, UMFT220XB and UMFT230XB Datasheet Version 1.3 Document Reference No.: FT 000506 Clearance No.: FTDI 272 3 Ordering Information Module Interface Features 2 2 UMFT201XB-01 I C USB to I C with four control bus lines, 3.3V power out (with a 50mA current limit) and fused 5V. Standard option, connector fitted to CN2. 2 2 UMFT201XB-NC I C USB to I C with four control bus lines, 3.3V power out (with a 50mA current limit) and fused 5V. No connector option, no connector is fitted to CN2. 2 2 UMFT201XB-WE I C USB to I C with four control bus lines, 3.3V power out (with a 50mA current limit) and fused 5V. Wire ended option, 6 flying leads fitted to CN2. UMFT220XB-01 4-bit USB to FT1248 uses 2 FT1248 I/O lines, 3.3V power out (with a 50mA FT1248 current limit) and fused 5V. Standard option, connector fitted to CN2. UMFT220XB-NC 4-bit USB to FT1248 uses 2 FT1248 I/O lines, 3.3V power out (with a 50mA FT1248 current limit) and fused 5V. No connector option, no connector is fitted to CN2. UMFT220XB-WE 4-bit USB to FT1248 uses 2 FT1248 I/O lines, 3.3V power out (with a 50mA FT1248 current limit) and fused 5V. Wire ended option, 6 flying leads fitted to CN2. UMFT230XB-01 Basic USB to UART with four control bus lines, 3.3V power out (with a 50mA UART current limit) and fused 5V. UART rate can be up to 3 Mega Baud. Standard option, connector fitted to CN2. UMFT230XB-NC Basic USB to UART with four control bus lines, 3.3V power out (with a 50mA UART current limit) and fused 5V. UART rate can be up to 3 Mega Baud. No connector option, no connector is fitted to CN2. UMFT230XB-WE Basic USB to UART with four control bus lines, 3.3V power out (with a 50mA UART current limit) and fused 5V. UART rate can be up to 3 Mega Baud. Wire ended option, 6 flying leads fitted to CN2. Copyright Future Technology Devices International Limited 2