VA800A-PROG FTDI

VA800A PROG Datasheet Version 1.1 Document Reference No.: BRT 000006 Clearance No.: BRT 010 FTDI Chip VA800A PROG Datasheet Programmer for VM800P Embedded Video Engine Plus module 1.1 Features 1 Introduction The VA800A PROG is a programmer for the Connects to the VM800P Plus module using the VM800P module. This provides a USB to SPI SPI interface bridge that will enable access to the ATMEGA328P on the VM800P module. Micro-B USB connector The module provides a suitable alternative to the inbuilt USB to UART programmer of the VM800P 6-way IDC connector and may also be used to recover a damaged/corrupted MCU. Powered from the PC USB port (5V) Power switch to control supply to the target Ribbon cable to connect to the VM800P Tag Connect socket. Neither the whole nor any part of the information contained in, or the product described in this manual, may be adapted or reproduced in any material or electronic form without the prior written consent of the copyright holder. This product and its documentation are supplied on an as-is basis and no warranty as to their suitability for any particular purpose is either made or implied. Future Technology Devices International Ltd will not accept any claim for damages howsoever arising as a result of use or failure of this product. Your statutory rights are not affected. This product or any variant of it is not intended for use in any medical appliance, device or system in which the failure of the product might reasonably be expected to result in personal injury. This document provides preliminary information that may be subject to change without notice. No freedom to use patents or other intellectual property rights is implied by the publication of this document. Future Technology Devices International Ltd, Unit 1, 2 Seaward Place, Centurion Business Park, Glasgow G41 1HH United Kingdom. Scotland Registered Company Number: SC136640 Copyright Bridgetek Limited 1 VA800A PROG Datasheet Version 1.1 Document Reference No.: BRT 000006 Clearance No.: BRT 010 2 Ordering Information Part No. Description VA800A PROG VA800A PROG module, programmer for VM800P Plus module Table 2-1 Ordering information Copyright Bridgetek Limited 2