EVAL-ADM3067EEBZ User Guide UG-1259 One Technology Way P.O. Box 9106 Norwood, MA 02062-9106, U.S.A. Tel: 781.329.4700 Fax: 781.461.3113 www.analog.com Evaluating the ADM3067E 3.0 V to 5.5 V, 12 kV IEC ESD Protected, 50 Mbps, RS-485 Transceiver FEATURES GENERAL DESCRIPTION Easy evaluation of ADM3067E 50 Mbps, RS-485 transceiver The EVAL-ADM3067EEBZ allows quick and easy evaluation of Board layout for standard, full-duplex, RS-485 footprint the ADM3067E 50 Mbps, RS-485 transceiver with standard, 14-lead SOIC, ADM3067EBRZ 14-lead NSOIC footprint. The evaluation board allows the input Power/ground connections through screw terminal block and output functions to be exercised without external components. 3.0 V to 5.5 V operating voltage range on VCC Screw terminal blocks provide convenient connections for power IEC ESD protection on the RS-485 A and B bus pins and ground, digital input and output, and RS-485 signals. The 12 kV contact discharge and 12 kV air discharge evaluation board can be powered by a standard configurable Screw terminal blocks for logic input/output and RS-485 signals bench power supply within the 3.0 V to 5.5 V range. Jumper-selectable enable/disable for RE and DE The EVAL-ADM3067EEBZ evaluation board has a footprint for Test points for measuring all signals the ADM3067EBRZ full-duplex, RS-485 transceiver in a 14-lead Resistors and footprints for termination and biasing networks NSOIC package. EVALUATION KIT CONTENTS For full details, see the ADM3067E data sheet, which must be EVAL-ADM3067EEBZ evaluation board used in conjunction with this user guide when using the EVAL- ADM3067EEBZ evaluation board. ADDITIONAL EQUIPMENT NEEDED Oscilloscope Signal generator 3 V to 5 V supply EVALUATION BOARD PHOTOGRAPH Figure 1. EVAL-ADM3067EEBZ Evaluation Board PLEASE SEE THE LAST PAGE FOR AN IMPORTANT WARNING AND LEGAL TERMS AND CONDITIONS. Rev. 0 Page 1 of 7 16664-001UG-1259 EVAL-ADM3067EEBZ User Guide TABLE OF CONTENTS Features .............................................................................................. 1 Input and Output Connections ...................................................3 Evaluation Kit Contents ................................................................... 1 Other Board Components............................................................3 Additional Equipment Needed ....................................................... 1 Full-Duplex RS-485 Transceivers Loopback Test .....................4 General Description ......................................................................... 1 IEC 61000-4-2 Electrostatic Discharge (ESD) Protection to 12 kV (Contact) and 12 kV (Air) ...........................................4 Evaluation Board Photograph ......................................................... 1 Evaluation Board Schematics and Artwork ...................................5 Revision History ............................................................................... 2 Ordering Information .......................................................................7 Evaluation Board Hardware ............................................................ 3 Bill of Materials ..............................................................................7 Setting Up the Evaluation Board ................................................ 3 REVISION HISTORY 3/2019Revision 0: Initial Version Rev. 0 Page 2 of 7