EVAL-ADuM5411EBZ User Guide UG-1007 One Technology Way P.O. Box 9106 Norwood, MA 02062-9106, U.S.A. Tel: 781.329.4700 Fax: 781.461.3113 www.analog.com Using the EVAL-ADuM5411EBZ Evaluation Board with iCoupler Quad-Channel Isolators and Integrated DC-to-DC Converters FEATURES GENERAL DESCRIPTION Access to 4 data channels and data output enable control pins The EVAL-ADuM5411EBZ supports quad-channel iCoupler data Easily configurable isoPower dc-to-dc converter controls isolators, including the ADuM5410/ADuM5411/ADuM5412 and Split primary and secondary power planes for independent ADuM6410/ADuM6411/ADuM6412, with an isoPower integrated operation of data channels and isoPower integrated dc-to- dc-to-dc converter in 24-lead SSOP packages. The EVAL- dc converters ADuM5411EBZ supports signal distribution, loopback, and loads Multiple connection options for data and power referenced to the power and ground planes. The evaluation board Support for printed circuit board (PCB) edge mounted also has EMI evaluation and bypass and bulk capacitors. Signal coaxial connectors sources can be conducted to the board through header pins or Support for active probes through edge mounted SMA connectors (SMA connectors must Layout for electromagnetic interference (EMI) evaluation be ordered separately). Screw terminal blocks on the evaluation board provide power connections. The board includes 0.2 inch DOCUMENTS NEEDED header positions for compatibility with active probes (probe header ADuM5410/ADuM5411/ADuM5412 data sheet pins must be ordered separately). ADuM6410/ADuM6411/ADuM6412 data sheet The evaluation board follows best PCB design practices for 4-layer AN-1349 Application Note boards, including a full power plane and ground plane on each AN-1109 Application Note side of the isolation barrier. No other EMI or noise mitigation AN-0971 Application Note design features are included on the evaluation board. In cases of EVALUATION KIT CONTENTS high speed operation, or when ultralow emissions are required, EVAL-ADuM5411EBZ, populated with the ADuM5411 refer to the AN-1349 Application Note, AN-1109 Application EVAL-ADuM5411UEBZ, DUT unpopulated (must be ordered Note, and AN-0971 Application Note for additional evaluation separately) board layout techniques. The EVAL-ADuM5411EBZ is supplied with the ADuM5411 ADDITIONAL EQUIPMENT NEEDED installed. Other supported iCoupler digital isolators with an One to three 3.3 V to 5.0 V power supplies integrated dc-to-dc converters must be ordered separately to use Edge mounted SMA with the EVAL-ADuM5411UEBZ, including the ADuM5410, ADuM5412, ADuM6410, ADuM6411, and ADuM6412 Complete specifications for the ADuM5410/ADuM5411/ ADuM5412 and the ADuM6410/ADuM6411/ADuM6412 are available in the ADuM5410/ADuM5411/ADuM5412 data sheet and ADuM6410/ADuM6411/ADuM6412 data sheet, respectively, available from Analog Devices, Inc., and should be consulted in conjunction with this data sheet when using the evaluation board. PLEASE SEE THE LAST PAGE FOR AN IMPORTANT WARNING AND LEGAL TERMS AND CONDITIONS. Rev. 0 Page 1 of 12 UG-1007 EVAL-ADuM5411EBZ User Guide TABLE OF CONTENTS Features .............................................................................................. 1 Connectors .....................................................................................4 Documents Needed .......................................................................... 1 Input Power/Isolated Power .........................................................4 Evaluation Kit Contents ................................................................... 1 Data Input/Output Structures .....................................................5 Additional Equipment Needed ....................................................... 1 Capacitors and Ferrite Beads on the PCB ..................................5 General Description ......................................................................... 1 High Voltage Capability ...............................................................5 Revision History ............................................................................... 2 Evaluation Board Schematic and Artwork .....................................7 Photograph of the EVAL-ADuM5411EBZ Evaluation Board ..... 3 Ordering Information .................................................................... 12 Evaluation Board Circuitry ............................................................. 4 Bill of Materials ........................................................................... 12 PCB Evaluation Goals .................................................................. 4 REVISION HISTORY 7/2016Revision 0: Initial Version Rev. 0 Page 2 of 12