Click here for production status of specific part numbers. MAX20327 12V Capable, Low-R , ON Beyond-the-Rails DPDT Analog Switch General Description Benefits and Features The MAX20327 ultra-small, low-on-resistance (R ) Distortion-Free Beyond-the-Rails Signaling ON double-pole/double-throw (DPDT) analog switches Negative Voltage Audio and Video Signal Capable feature Beyond-the-Rails capability that allows signals -5.5V to +12V Analog Signal Range Independent of V from -5.5V to +12V to pass without distortion, even when CC the power supply is below the signal range. The low on- On-Resistance 0.2 (Typ) +1.6V to +5.5V Single-Supply Range resistance (0.2) also makes the devices ideal for low- distortion switching applications, such as audio or video. Total Harmonic Distortion Plus Noise 0.001% (Typ) On-Resistance Flatness 0.001 (Typ) The MAX20327 is fully specified to operate from a Low Supply Current 30A (Typ) at 1.6V single +1.6V to +5.5V power supply. Because of the low supply current requirement, V can be provided by Can be Powered by GPIO CC High-Impedance Mode When V Not Applied a GPIO. When power is not applied, the switches go to CC a high-impedance mode and all analog signal ports can ESD Protection on COM withstand signals from -5.5V to +5.5V. The switches are 15kV Human Body Model controlled with a single control bit, CB. 8kV IEC 61000-4-2 Air Gap The MAX20327 is available in a 1.6mm x 1.6mm, 6kV IEC 61000-4-2 Contact 0.4mm pitch, 9-bump wafer-level package (WLP) and Design Flexibility operates over the -40C to +85C extended temperature Break-Before-Make Operation range. 9-Bump WLP (1.6mm x 1.6mm) -40C to +85C Operating Temperature Range Applications Cell phone Tablet Ordering Information appears at end of data sheet. Portable Audio/Video Equipment Portable Navigation Devices 19-100268 Rev 0 6/18MAX20327 12V Capable, Low-R , ON Beyond-the-Rails DPDT Analog Switch Absolute Maximum Ratings V , CB to GND .....................................................-0.3V to +6V Continuous Power Dissipation (T = +70C, CC A NC , NO to GND .................................................-6V to +12.5V derate 11.91mW/C above +70C.) ..........................952.8mW COM to GND (V < 1.6V) ......................................-6V to +6V Operating Temperature Range ........................... -40C to +85C CC COM to GND (V 1.6V) ........ -6V to (+17.5 - V /V )V Junction Temperature ......................................................+150C CC NC NO Continuous Current NC , NO , COM ................ -1.1A to +1.1A Storage Temperature Range ............................ -65C to +150C Peak Current NC , NO , COM Soldering Temperature (reflow) .......................................+260C (50% duty cycle, 10ms pulse) .......................... -1.6A to +1.6A Stresses beyond those listed under Absolute Maximum Ratings may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated in the operational sections of the specifications is not implied. Exposure to absolute maximum rating conditions for extended periods may affect device reliability. Package Information WLP PACKAGE CODE W91P1+1 Outline Number 21-100195 Land Pattern Number Refer to Application Note 1891 Thermal Resistance, Four-Layer Board: Junction to Ambient ( ) 83.98C/W JA Junction to Case ( ) N/A JC For the latest package outline information and land patterns (footprints), go to www.maximintegrated.com/packages. Note that a +, , or - in the package code indicates RoHS status only. Package drawings may show a different suffix character, but the drawing pertains to the package regardless of RoHS status. Package thermal resistances were obtained using the method described in JEDEC specification JESD51-7, using a four-layer board. For detailed information on package thermal considerations, refer to www.maximintegrated.com/thermal-tutorial. Maxim Integrated 2 www.maximintegrated.com