MAX22514EVKIT# Analog Devices

Click here to ask an associate for production status of specific part numbers. Evaluates: MAX22514 MAX22514 Evaluation Kit Quick Start General Description Required Equipment The MAX22514 evaluation kit (EV kit) consists of the evaluation board and software. The EV kit is a fully MAX22514 EV kit (USB-A-to-micro-B cable included) assembled and tested circuit board that evaluates the User-supplied Windows 10 PC with a spare USB port MAX22514 IO-Link device transceiver with integrated 24V, 1A DC power supply DC-DC buck regulator. The EV kit includes Windows- Multimeter/voltmeter compatible software that provides a graphical user Note: In the following sections, software-related items are interface (GUI) for exercising the features of the identified by bolding. Text in bold refers to items directly MAX22514. The EV kit is connected to a PC through a from the EV kit software. Text in bold and underlined USB-A-to-micro-B cable. refers to items from the Windows operating system. Windows-based GUI software is available for use with the Procedure EV kit and can be downloaded from Maxims website at www.maximintegrated.com/products/MAX22514 The EV kit is fully assembled and tested. Follow the steps (under the Design & Development tab). Windows 7 or to install the EV kit software, make required hardware newer Windows operating system is required to use the connections, and start operation of the kit. Note that after EV kit software. communication is established, the IC must still be configured correctly for desired operation mode. Make sure the PC is connected to the Internet throughout the Features process so that the USB driver can be automatically installed. IO-Link-Compliant Device Transceiver I/O and SPI Interface Terminals 1. Visit www.maximintegrated.com/products/MAX22514 Arduino Uno Compatible Connector (under the Design & Development tab) to download the Windows 10-Compatible Software latest version of the MAX22514 EV kit software. Save USB-PC Connection the software to a temporary folder and unpack the zip Proven PCB Layout file. Fully Assembled and Tested 2. Install the EV kit software on the computer by running the MAX22513 5EVKITSetupVx.xx.exe program inside the temporary folder. This copies the program MAX22514 EV Kit Files files and creates an icon in the Windows Start menu. FILE DESCRIPTION The software requires the .NET Framework 4.5 or later. MAX22513 5EVKIT If connected to the Internet, Windows automatically Installs EV kit files onto the computer SetupVx.xx.exe updates the .NET Framework as needed. Ordering Information appears at end of data sheet. 319-100877 Rev 0 1/22 SWITCH USB MAX22514 Evaluation Kit Evaluates: MAX22514 EV Kit Photo EV Block Diagram POWER SUPPLY BARREL CONNECTORS ARDUINO HEADERS I/O TEST POINTS V SELE CT L MA X22514 FTDI USB-to-UART SPI A ND I/O SIGNALS V5 POWER SELE CT M12 CONNECTOR ARDUINO HEADERS 3. The EV kit software launches automatically after install, and it can be launched by clicking on its icon in the Windows Start menu. 4. Verify that all the jumpers are in their default positions, as shown in Table 1. 5. Connect the 24V DC power supply to the V24 (TP6) and GND (TP7) barrel connectors or to the V24 (TP1) and GND (TP10) test points on the EV kit board. 6. Connect the multimeter to the V test point (TP4). 5 7. Turn on the V24 power supply. Ensure that the voltage on V5 (TP22) is 5V. 8. Connect the USB cable from the PC to the EV kit board. A Windows message appears when connecting the EV kit. 9. Start the EV kit software by opening its icon in the Windows Start Programs Maxim Integrated menu. The EV kit software main window appears, as shown in Figure 1. 10. Verify that Status: MAX22514 Connected is displayed on the status bar at the bottom left of the main window (Figure 1). 11. Click on the Include Interrupt Register box to include the INTERRUPT register in serial interface reads. Click the Read All button to read all of the registers in the device. 12. Select a register in the top register table to access the bits in that register. 13. Set the individual bits for that register by selecting available settings from the drop-down menu for each bit in the lower register table. www.analog.com Analog Devices 2