EVALUATION KIT AVAILABLE Click here for production status of specific part numbers. 2 MAX28200 16-Bit Microcontroller with ADC and I C General Description Benefits and Features The MAX28200 is a low-power, 16-bit MAXQ microcontroller High-Performance, Low-Power, 16-Bit RISC Core (C) designed for low-power applications, including smart Internal 12MHz Oscillator Requires No External phones and consumer electronics. The device combines a Components powerful 16-bit RISC microcontroller with a 10-bit, 93.75ksps Two-Channel, 10-Bit 93.75ksps ADC 2 ADC along with an I C communications port. The device 2 I C Slave Peripheral includes four GPIO pins. The device includes 16KB of flash memory and 2KB of data SRAM. Additional utility ROM 400kHz Operating Frequency 2 space includes macros such as an I C bootloader to enable Flash Bootloader Function flash memory firmware updates in the field. The device Wakeup from Ultra-Low Power Stop Mode on provides NIST SP 800-185 compliant secure hash algorithm 2 I C Address Match (SHA-3) KMAC challenge and response authentication and 16-Bit PWM Timer Output can be paired with other SHA-3 devices. Wake-Up Timer For the ultimate in low-power battery-operated SHA-3 KMAC Secure Authentication with RNG performance, the device includes an ultra-low-power stop mode. In this mode, the minimum amount of 1.71V to 3.63V Operating Voltage circuitry is powered. The device wakes up on a matching 16-Bit Instruction Word, 16-Bit Data Bus 2 I C address. Wake-up sources also include external Memory Features interrupts, the power-fail warning, and a wake-up timer 16KB Flash Memory interrupts. The microcontroller runs from a wide 1.71V to 2KB Data SRAM 3.63V operating voltage. -40C to +85C Operating Temperature Applications Low Power Consumption Smartphones 0.2A (typ), 2.0A (max) in Stop Mode, Consumer Electronics T = +25C, Power-Fail Monitor Disabled A 2.7mA (typ) at 12MHz in Active Mode Ordering Information appears at end of data sheet. 1.7mm x 1.8mm x 0.5mm 12-Bump WLP Package Applications MAX28200 2 CHANNEL 16-BIT MAXQ RISC CPU 10-BIT ADC 2KB DATA UTILITY ROM 16KB FLASH SRAM VOLTAGE 8kHz NANO INTERNAL MONITOR RING OSCILLATOR 2 I C WATCHDOG REGULATOR SHA-3 WITH COMPARATOR PWM/TIMER 128-KEY MAXQ is a registered trademark of Maxim Integrated Products, Inc. 19-100388 Rev 0 8/182 MAX28200 16-Bit Microcontroller with ADC and I C Absolute Maximum Ratings V .....................................................................-0.3V to +3.63V Storage Temperature Range ............................ -65C to +150C DD Any Ball ..............................................................-0.3V to +3.63V Soldering Temperature (reflow) .......................................+260C Operating Temperature Range ........................... -40C to +85C Stresses beyond those listed under Absolute Maximum Ratings may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated in the operational sections of the specifications is not implied. Exposure to absolute maximum rating conditions for extended periods may affect device reliability. Package Information 12 WLP Package Code N121C1+1 Outline Number 21-100300 Land Pattern Number Refer to Application Note 1891 Thermal Resistance, Four-Layer Board: Junction to Ambient ( ) 72.82C/W JA Junction to Case ( ) N/A JC For the latest package outline information and land patterns (footprints), go to www.maximintegrated.com/packages. Note that a +, , or - in the package code indicates RoHS status only. Package drawings may show a different suffix character, but the drawing pertains to the package regardless of RoHS status. Package thermal resistances were obtained using the method described in JEDEC specification JESD51-7, using a four-layer board. For detailed information on package thermal considerations, refer to www.maximintegrated.com/thermal-tutorial. Maxim Integrated 2 www.maximintegrated.com