MAX336/MAX337 16-Channel/Dual 8-Channel, Low-Leakage, CMOS Analog Multiplexers General Description Benefits and Features The MAX336/MAX337 are monolithic, CMOS analog < 400 (max) On-Resistance multiplexers (muxes). The 16-channel MAX336 is < 500ns Transition Time designed to connect one of 16 inputs to a common output < 10 On-Resistance Match by control of a 4-bit binary address. The dual, 8-channel MAX337 is designed to connect one of eight inputs to < 20pA NO-Off Leakage Current at +25C a common output by control of a 3-bit binary address. 3.5pC Charge Injection Both devices can be used as either a mux or a demux. +4.5V to +30V Single Supply On-resistance is 400 (max), and the devices conduct 4.5V to 20V Dual Supplies current equally well in both directions. Plug-In Upgrade for Industry-Standard These muxes feature extremely low off leakages (less DG506/DG507 than 20pA at +25C) and on-channel leakages (less than Bidirectional Rail-to-Rail Signal Handling 50pA at +25C). The new design offers guaranteed low charge injection (3.5pC, typ) and electrostatic discharge TTL/CMOS-Logic Compatible (ESD) protection greater than 2000V, per method 3015.7. > 2000V ESD Protection, per Method 3015.7 These improved muxes are pin-compatible upgrades for the industry-standard DG506 and DG507. Ordering Information The MAX336/MAX337 operate from a single +4.5V to PART TEMP- RANGE PIN-PACKAGE +30V supply or from dual 4.5V to 20V supplies. All MAX336CPI+ 0C to +70C 28 Plastic DIP control inputs (whether address or enable) are TTL MAX336CWI+ 0C to +70C 28 Wide SO compatible (0.8V to 2.4V) over the full specied tempera- ture range and over the 4.5V to 18V supply range. MAX336CAI+ 0C to +70C 28 SSOP MAX336C/D 0C to +70C Dice* Applications Ordering Information appears at end of data sheet. Precision Data Acquisition Precision Signal Routing * Contact factory for dice specications. Test Equipment +Denotes lead(Pb)-free/RoHS-compliant package. Pin Configurations/Functional Diagrams/Truth Tables TOP VIEW V+ V- GND + V+ 1 28 COM NO1 MAX336 N.C. 2 27 V- NO2 ON A3 A2 A1 A0 EN NO3 SWITCH N.C. 3 26 NO8 NO4 X X X X 0 NONE NO16 4 25 NO7 NO5 0 0 0 0 1 1 0 0 0 1 1 2 NO15 5 24 NO6 NO6 MAX336 0 0 1 0 1 3 NO7 NO14 6 23 NO5 0 0 1 1 1 4 NO8 COM 0 1 0 0 1 5 NO13 7 22 NO4 NO9 0 1 0 1 1 6 NO10 NO12 8 21 NO3 0 1 1 0 1 7 NO11 0 1 1 1 1 8 NO11 9 20 NO2 1 0 0 0 1 9 NO12 1 0 0 1 1 10 NO10 10 19 NO1 NO13 1 0 1 0 1 11 NO14 NO9 11 18 EN 1 0 1 1 1 12 NO15 1 1 0 0 1 13 GND 12 17 A0 NO16 1 1 0 1 1 14 1 1 1 0 1 15 N.C. 13 16 A1 CMOS DECODERS/DRIVERS 1 1 1 1 1 16 A3 14 15 A2 LOGIC 0 = V 0.8V, LOGIC 1 = V 2.4V A0 A1 A2 A3 EN AL AH DIP/SO/SSOP/TSSOP MAX336 16-CHANNEL SINGLE-ENDED MULTIPLEXER Continued at end of data sheet. N.C. = NO INTERNAL CONNECTION Rail-to-Rail is a registered trademark of Nippon Motorola Ltd. 19-1193 Rev 1 10/14MAX336/MAX337 16-Channel/Dual 8-Channel, Low-Leakage, CMOS Analog Multiplexers Absolute Maximum Ratings Voltage Referenced to V- TSSOP (derate 12.80mW/C aboce +70C).........1025.60mW V+............................................................................ -0.3V, 44V Wide SO (derate 12.50mW/C above +70C)................1.00W GND........................................................................ -0.3V, 25V SSOP (derate 9.10mW/C above +70C)..................727.3mW Digital Inputs, A , EN , NO, COM CERDIP (derate 16.67mW/C above +70C).................1.33W (Note 1)............................................(V- - 0.3V) to (V+ + 0.3V) Operating Temperature Ranges or 30mA (whichever occurs first) MAX336C I/MAX337C I.....................................0C to +70C Continuous Current (any terminal)..................................... 30mA MAX336E I/MAX337E I..................................-40C to +85C Peak Current, NO or COM MAX336MJI/MAX337MJI...............................-55C to +125C (pulsed at 1ms, 10% duty cycle max).......................... 100mA Storage Temperature Range .............................-65C to +150C Continuous Power Dissipation (T = +70 C) Lead Temperature (soldering, 10sec) .............................+300C A Plastic DIP (derate 14.29mW/C above +70C)........... 1.14W Soldering Temperature (reflow)....................................... +260C Plastic DIP (derate 14.30,W/C above +70C)......1142.90mW Note 1: Signals on any terminal exceeding V+ or V- are clamped by internal diodes. Limit forward current to maximum current rating. Stresses beyond those listed under Absolute Maximum Ratings may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated in the operational sections of the specifications is not implied. Exposure to absolute maximum rating conditions for extended periods may affect device reliability. Electrical CharacteristicsDual Supplies (V+ = +15V, V- = -15V, GND = 0V, V = +2.4V, V = +0.8V, T = T to T , unless otherwise noted.) AH AL A MIN MAX MIN TYP MAX PARAMETER SYMBOL CONDITIONS UNITS (Note 2) SWITCH Analog Signal Range V , V (Note 3) -15 15 V NO COM T = +25 C 220 400 I = 0.2mA, A NO On-Resistance R ON V = 10V COM T = T to T 500 A MIN MAX T = +25 C 5 10 On-Resistance Matching I = 0.2mA, A NO R ON Between Channels V = 10V (Note 4) COM T = T to T 15 A MIN MAX T = +25 C -0.02 0.001 0.02 A NO-Off Leakage Current V = 10V, COM I C, E -1.25 1.25 nA NO(OFF) T = T A MIN (Note 5) V = 10V, V = 0V NO EN to T MAX M -20 20 T = +25 C -0.05 0.05 A V =10V, NO V = 10V, MAX336 C, E -6.5 6.5 COM T = T A MIN V = 0V EN to T MAX M -80 80 COM-Off Leakage Current I nA COM(OFF) (Note 5) T = +25 C -0.05 0.05 A V = 10V, NO V = 10V, MAX337 C, E -3.25 3.25 COM T = T A MIN V = 0V EN to T MAX M -40 40 T = +25 C -0.05 0.05 A MAX336 C, E -6.5 6.5 V = 10V, T = T COM A MIN V = 10V, to T NO MAX M -80 80 COM-On Leakage Current I sequence nA COM(ON) (Note 5) T = +25 C -0.05 0.05 A each switch on MAX337 C, E -3.25 3.25 T = T A MIN to T MAX M -40 40 Maxim Integrated 2 www.maximintegrated.com