MAX4617/MAX4618/ MAX4619 High-Speed, Low-Voltage, CMOS Analog Multiplexers/Switches General Description Features The MAX4617/MAX4618/MAX4619 are high-speed, low- Fast Switching Times 15ns t voltage, CMOS analog ICs configured as an 8-channel ON 10ns t OFF multiplexer (MAX4617), two 4-channel multiplexers Pin Compatible with Industry-Standard (MAX4618), and three single-pole/double-throw (SPDT) 74HC4051/74HC4052/74HC4053 and switches (MAX4619). MAX4581/MAX4582/MAX4583 These CMOS devices can operate continuously with a Guaranteed On-Resistance +2V to +5.5V single supply. Each switch can handle 10 max (+5V Supply) rail-to-rail analog signals. The off-leakage current is 20 max (+3V Supply) only 1nA at T = +25C and 10nA at T = +85C. A A Guaranteed 1 On-Resistance Match Between All digital inputs have 0.8V to 2.4V logic thresholds, Channels (single +5V supply) ensuring TTL/CMOS-logic compatibility when using a Guaranteed Low Off-Leakage Current: single +5V supply. 1nA at +25C Guaranteed Low On-Leakage Current: 1nA at +25C +2V to +5.5V Single-Supply Operation TTL/CMOS-Logic Compatible Low Crosstalk: <-96dB High Off-Isolation: <-93dB Applications Low Distortion: <0.017% (600) Battery-Operated Equipment Ordering Information Audio/Video Signal Routing PART TEMP RANGE PIN-PACKAGE Low-Voltage Data-Acquisition Systems MAX4617CUE+T 0C to +70C 16 TSSOP Communications Circuits MAX4617CSE+T 0C to +70C 16 Narrow SO MAX4617CPE+T 0C to +70C 16 Plastic DIP +Denotes a lead(Pb)-free/RoHS-compliant package. T = Tape and reel. Ordering Information continued at end of data sheet. Pin Configurations/Functional Diagrams TOP VIEW MAX4618 MAX4619 MAX4617 + ++ X4 Y0 1 Y1 1 V 16 V 16 V 16 CC CC CC Y2 Y0 X6 2 2 15 X2 2 15 Y 15 X2 Y 3 Z1 3 X 3 X1 14 X1 14 X 14 X7 Y3 4 X Z 4 X1 4 13 X0 13 13 Y1 Z0 X5 5 5 12 X0 5 12 X0 12 X3 ENABLE ENABLE 6 ENABLE 6 6 11 A 11 X3 11 A N.C. N.C. N.C. 7 7 LOGIC 10 A 7 10 B LOGIC 10 B GND 8 9 GND 8 9 GND 8 9 C B C DIP/SO/TSSOP DIP/SO/TSSOP DIP/SO/TSSOP For pricing, delivery, and ordering information, please contact Maxim Direct at 1-888-629-4642, or visit Maxims website at www.maximintegrated.com. 19-1502 Rev 3 12/12MAX4617/MAX4618/MAX4619 High-Speed, Low-Voltage, CMOS Analog Multiplexers/Switches ABSOLUTE MAXIMUM RATINGS Voltages Referenced to GND Narrow SO (derate 8.70mW/C above +70C)..............696mW V A, B, C, or Enable...........................................-0.3V to +6V Plastic DIP (derate 10.53mW/C above +70C) ..............842mW CC, Voltage into Any Analog Terminal Operating Temperature Ranges (Note 1).........................................................-0.3V to (V + 0.3V) MAX461 C ......................................................0C to +70C CC Continuous Current into Any Terminal..............................75mA MAX461 E ....................................................-40C to +85C Peak Current, X , Y , Z Storage Temperature Range .............................-65C to +150C (pulsed at 1ms, 10% duty cycle) .................................200mA Lead Temperature (soldering, 10sec) .............................+300C Continuous Power Dissipation (T = +70C) Soldering Temperature (reflow) .......................................+260C A TSSOP (derate 9.4mW/C above +70C)......................755mW Note 1: Voltages exceeding V or GND on any analog signal terminal are clamped by internal diodes. Limit forward-diode current CC to maximum current rating. Stresses beyond those listed under Absolute Maximum Ratings may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated in the operational sections of the specifications is not implied. Exposure to absolute maximum rating conditions for extended periods may affect device reliability. ELECTRICAL CHARACTERISTICSSingle +5V Supply (V = +4.5V to +5.5V, V = 2.4V, V = 0.8V, T = T to T , unless otherwise noted. Typical values are at T = +25C.) (Note 2) CC H L A MIN MAX A PARAMETER SYMBOL CONDITIONS MIN TYP MAX UNITS ANALOG SWITCH Analog-Signal Range V , V , V C, E 0V V X Y Z CC T = +25C 810 V = 4.5V I , I , I = 10mA A CC X Y Z Switch On-Resistance R ON V , V , V = 3V X Y Z C, E 13 Switch On-Resistance T = +25C 0.2 1 A V = 5V I , I , I = 10mA CC X Y Z Match Between R ON V , V , V = 3V X Y Z C, E 1.2 Channels (Note 3) Switch On-Resistance V = 5V I , I , I = 10mA CC X Y Z R C, E 1 FLAT(ON) Flatness (Note 4) V , V , V = 1V, 2V, 3V X Y Z X , Y , Z T = +25C -1 0.002 1 I , A X (OFF) V = 5.5V V , V , V = 4.5V, 1V CC X Y Z Off-Leakage Current I , nA Y (OFF) V , V , V = 1V, 4.5V X Y Z (Note 5) I Z (OFF) C, E -10 10 T = +25C -1 0.002 1 I , V = 5.5V V = -5.5V A X(OFF) CC EE X, Y, Z Off-Leakage I , V , V , V = 4.5V, 1V nA Y(OFF) X Y Z Current (Note 5) I V , V , V = 1V, 4.5V Z(OFF) X Y Z C, E -10 10 T = +25C -1 0.002 1 I , A X(ON) X, Y, Z On-Leakage V = 5.5V V , V , V = 1V, 4.5V CC X Y Z I , nA Y(ON) Current (Note 5) V , V , V = 1V, 4.5V or unconnected X Y Z I Z(ON) C, E -10 10 DIGITAL I/O V , V , AH BH Input Voltage High V C, E 2.4 V CH, V ENABLEH V , V , AL BL Input Voltage Low V C, E 0.8 V CL, V ENABLEL 2 Maxim Integrated