MAX4691MAX4694 19-1945 Rev 6 1/12 Low-Voltage 8:1 Mux/Dual 4:1 Mux/Triple SPDT/ Quad SPDT in UCSP Package General Description Features The MAX4691MAX4694 are low-voltage CMOS analog 16 Bump, 0.5mm-Pitch UCSP (2mm x 2mm) ICs configured as an 8-channel multiplexer (MAX4691), 1.8V Logic Compatibility two 4-channel multiplexers (MAX4692), three single- Guaranteed On-Resistance pole/double-throw (SPDT) switches (MAX4693), and four SPDT switches (MAX4694). 70 (max) with +2.7V Supply 35 (max) with +5V Supply The MAX4691/MAX4692/MAX4693 operate from either 25 (max) with 4.5V Dual Supplies a single +2V to +11V power supply or dual 2V to 5.5V power supplies. When operating from 5V sup- Guaranteed Match Between Channels plies they offer 25 on-resistance (R ), 3.5 (max) ON 5 (max) with +2.7V Supply R flatness, and 3 (max) matching between chan- ON 3 (max) with 4.5V Dual Supplies nels. The MAX4694 operates from a single +2V to +11V Guaranteed Flatness Over Signal Range supply. Each switch has rail-to-rail signal handling and 3.5 (max) with 4.5V Dual Supplies a low 1nA leakage current. Low Leakage Currents Over Temperature All digital inputs are 1.8V logic-compatible when oper- 20nA (max) at +85C ating from a +3V supply and TTL compatible when operating from a +5V supply. Fast 90ns Transition Time The MAX4691MAX4694 are available in 16-pin, Guaranteed Break-Before-Make 4mm 4mm QFN and TQFN and 16-bump UCSP pack- Single-Supply Operation from +2V to +11V ages. The chip-scale package (UCSP) occupies a 2mm 2mm area, significantly reducing the required Dual-Supply Operation from 2V to 5.5V PC board area. (MAX4691/MAX4692/MAX4693) V+ to V- Signal Handling Applications Audio and Video Signal Routing Low Crosstalk: -90dB (100kHz) Cellular Phones High Off-Isolation: -88dB (100kHz) Battery-Operated Equipment Communications Circuits Ordering Information Modems PART TEMP RANGE PIN-PACKAGE Functional Diagrams MAX4691EBE+T -40C to +85C 16-Bump UCSP* MAX4691EGE+ -40C to +85C 16 QFN-EP MAX4691ETE+T -40C to +85C 16 TQFN-EP MAX4691 MAX4692EBE+T -40C to +85C 16-Bump UCSP* X0 MAX4692EGE+ -40C to +85C 16 QFN-EP X1 MAX4692ETE+T -40C to +85C 16 TQFN-EP X2 MAX4693EBE+T -40C to +85C 16-Bump UCSP* X3 X MAX4693EGE+ -40C to +85C 16 QFN-EP X4 MAX4693ETE+T -40C to +85C 16 TQFN-EP X5 X6 MAX4694EBE+T -40C to +85C 16-Bump UCSP* X7 MAX4694EGE+ -40C to +85C 16 QFN-EP MAX4694ETE+T -40C to +85C 16 TQFN-EP LOGIC EN *UCSP reliability is integrally linked to the users assembly meth- ods, circuit board, and environment. See the UCSP Reliability section for more information. A B C EP = Exposed pad. Pin Configurations appear at end of data sheet. +Denotes a lead(Pb)-free/RoHS-compliant package. T = Tape and reel. Functional Diagrams continued at end of data sheet. UCSP is a trademark of Maxim Integrated Products, Inc. Maxim Integrated Products 1 For pricing, delivery, and ordering information, please contact Maxim Direct at 1-888-629-4642, or visit Maxims website at www.maxim-ic.com.Low-Voltage 8:1 Mux/Dual 4:1 Mux/Triple SPDT/ Quad SPDT in UCSP Package ABSOLUTE MAXIMUM RATINGS V+ to GND..............................................................-0.3V to +12V Continuous Power Dissipation (T = +70C) A V+ to V- (MAX4691/MAX4692/MAX4693) ..............-0.3V to +12V 16-Bump UCSP (derate 8.2mW/C above +70C) .... 659mW Voltage into any Terminal (Note 1) ...... (V- - 0.3V) to (V+ + 0.3V) 16-Pin QFN (derate 18.5mW/C above +70C) ....... 1481mW Continuous Current into any Terminal ............................. 20mA 16-Pin TQFN (derate 16.9mW/C above +70C) ..... 1349mW Peak Current W , X , Y , Z (pulsed at 1ms, Operating Temperature Range .......................... -40C to +85C 10% duty cycle)...........................................................40mA Storage Temperature Range ............................ -65C to +150C ESD per Method 3015.7......................................................> 2kV Lead Temperature (TQFN, QFN only, soldering, 10s).... +300C Soldering Temperature (reflow) ...................................... +260C Note 1: Voltages exceeding V+ or V- on any signal terminal are clamped by internal diodes. Limit forward-diode current to maxi- mum current rating. Stresses beyond those listed under Absolute Maximum Ratings may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated in the operational sections of the specifications is not implied. Exposure to absolute maximum rating conditions for extended periods may affect device reliability. ELECTRICAL CHARACTERISTICSSingle +3V Supply (V+ = +2.7V to +3.6V, V- = 0V, V = +1.4V, V = +0.4V, T = -40C to +85C, unless otherwise noted. Typical values are at IH IL A T = +25C.) (Notes 2, 3, 4) A PARAMETER SYMBOL CONDITIONS T MIN TYP MAX UNITS A ANALOG SWITCH V , V , V , W X Y V ,V , Z W Analog Signal Range - 40C to +85 C 0V+ V V , V , X Y V Z + 25C 4570 V+ = 2.7V I , I , I , I = 1mA W X Y Z On-Resistance (Note 5) R ON V , V , V , V = 1.5V W X Y Z - 40C to +85 C 80 On-Resistance Match + 25C 25 V+ = 2.7V I , I , I , I = 1mA W X Y Z Between Channels R ON V , V , V , V = 1.5V W X Y Z - 40C to +85 C 6 (Notes 5, 6) V+ = 3.6V V , V , V , V = 3V, + 25C -1 +1 W X Y Z W , X , Y , Z Off- I , I , W X 0.6V V , V , V , V = 0.6V, nA W X Y Z Leakage Current (Note 7) I , I Y Z - 40C to +8 5C -10 +10 3V I , W(OFF) + 25C -2 +2 V+ = 3.6V V , V , V , V = 3V, W X Y Z W, X, Y, Z Off-Leakage I , X(OFF) 0.6V V , V , V , V = 0.6V, nA W X Y Z Current (Note 7) I , Y(OFF) 3V - 40C to +8 5C -20 +20 I Z(OFF) I , W(ON) + 25C -2 +2 V+ = 3.6V V , V , V , V = 0.6V, W X Y Z W, X, Y, Z On-Leakage I , X(ON) nA 3V V , V , V , V = 0.6V, 3V, W X Y Z Current (Note 7) I , Y(ON) or unconnected - 40C to +8 5C -20 +20 I Z(ON) 2 MAX4691MAX4694