EVALUATION KIT AVAILABLE MAX9617MAX9620 Single/Dual SC70, Zero-Drift, High-Efficiency, 1.5MHz Op Amps with RRIO General Description Benefits and Features The MAX9617MAX9620 are low-power, zero-drift oper- Extends Battery Life S ational amplifiers available in space-saving SC70 pack- Low 59A Quiescent Current ages. They are designed for use in portable consumer, Single 1.8V to 5.5V Supply Voltage Range medical, and industrial applications. Power-Saving Shutdown Mode (MAX9619) The MAX9617MAX9620 feature rail-to-rail CMOS inputs Supports a Wide Range of Precision Applications S and outputs, a 1.5MHz GBW at just 59FA supply current Very Low 10V (max) Input Offset Voltage and 10FV (max) zero-drift input offset voltage over time Ultra-Low 10pA Input Bias Current and temperature. The zero-drift feature reduces the high 1.5MHz GBW 1/f noise typically found in CMOS input operational ampli- fiers, making it useful for a wide variety of low-frequency Unity-Gain Stable measurement applications. 0.42V from 0.1Hz to 10Hz P-P The MAX9617 and MAX9619 are available in a space- 42nV/Hz at 1kHz saving, 2mm x 2mm, 6-pin SC70 package. The MAX9619 Rail-to-Rail Inputs and Outputs features a power-saving shutdown mode. The MAX9618 Saves Board Space S is available in a 2mm x 2mm, 8-pin SC70 package. The 5-Pin SC70 (MAX9620), 6-Pin SC70 (MAX9617/ MAX9620 is available in a 2mm x 2mm, 5-pin SC70 MAX9619), and 8-Pin SC70 (MAX9618) Packages package. All devices are specified over the -40NC to +125NC automotive operating temperature range. Applications Ordering Information Sensor Interfaces PIN- TOP PART TEMP RANGE Loop-Powered Systems PACKAGE MARK Portable Medical Devices MAX9617AXT+ -40NC to +125NC 6 SC70 ADS MAX9618AXA+ -40NC to +125NC 8 SC70 AAC Battery-Powered Devices MAX9619AXT+ -40NC to +125NC 6 SC70 ADX Cardiac Monitors MAX9620AXK+ -40NC to +125NC 5 SC70 AUF +Denotes a lead(Pb)-free/RoHS-compliant package. Block Diagram V IN +5V MAX9617 ADC For pricing, delivery, and ordering information, please contact Maxim Direct at 1-888-629-4642, or visit Maxims website at www.maximintegrated.com. 19-4753 Rev 8 9/20MAX9617MAX9620 Single/Dual SC70, Zero-Drift, High-Efficiency, 1.5MHz Op Amps with RRIO ABSOLUTE MAXIMUM RATINGS IN+, IN-, SHDN, (V to GND) ...............................-0.3V to +6V 6-Pin SC70 (derate 3.1mW/NC above +70NC) ..........245.4mW DD 8-Pin SC70 (derate 3.1mW/NC above +70NC) .............245mW OUT to GND ............................................. -0.3V to (V + 0.3V) DD Short-Circuit Duration to Either Supply Rail, Operating Temperature Range ........................ -40NC to +125NC Junction Temperature .....................................................+150NC OUT, OUTA, OUTB ............................................................ 10s Continuous Input Current (any pins) ............................... 20mA Storage Temperature Range ............................ -65NC to +150NC Lead Temperature (soldering, 10s) ................................+300NC Continuos Power Dissipation (T = +70NC) A Soldering Temperature (reflow) ......................................+260NC 5-Pin SC70 (derate 3.1mW/NC above +70NC) .............247mW Stresses beyond those listed under Absolute Maximum Ratings may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated in the operational sections of the specifications is not implied. Exposure to absolute maximum rating conditions for extended periods may affect device reliability. ELECTRICAL CHARACTERISTICS (V = +3.3V, V = 0V, V = V = V /2, R = 100kI to V /2, T = -40NC to +125NC, unless otherwise noted. Typical values DD GND IN+ IN- DD L DD A are at +25NC.) (Note 1) PARAMETER SYMBOL CONDITIONS MIN TYP MAX UNITS POWER SUPPLY Guaranteed by PSRR, 0NC P T P +70NC 1.6 5.5 A Supply Voltage Range V V DD Guaranteed by PSRR, -40NC P T P +125NC 1.8 5.5 A T = +25NC 59 78 Supply Current A I FA DD (per Amplifier) -40NC P T P +125NC 111 A T = +25NC 119 135 A V = 1.8V to 5.5V Power-Supply Rejection Ratio DD PSRR -40NC P T P +125NC 107 dB A (Note 2) 0NC P T P +70NC, V = 1.6V to 5.5V 116 135 A DD Power-Up Time t V = 0V to 3V step, A = 1V/V 20 Fs ON DD V Shutdown Supply Current I MAX9619 only 300 nA SHDN Turn-On Time from Shutdown t V = 3.3V, V = 0V to 3.3V step 50 Fs OSD DD SHDN (MAX9619) DC SPECIFICATIONS T = +25NC 0.8 10 A Input Offset Voltage (Note 2) V FV OS 25 -40NC P T P +125NC A Input Offset Voltage Drift (Note 2) 5 120 DV nV/NC OS T =+25NC 31 80 A Input Bias Current (Note 2) I -40NC P T P +85NC 95 pA B A -40NC P T P +125NC 580 A Input Offset Current I 5 pA OS T = +25NC -0.1 V + 0.1 Guaranteed by A DD Input Common-Mode Range V V CM CMRR test -40NC P T P +125NC -0.1 V + 0.05 A DD -0.1V P V P V + 0.1V, T = +25NC 122 135 CM DD A Common-Mode Rejection Ratio CMRR dB -0.1V P V P V + 0.05V, CM DD (Note 2) 116 -40NC P T P +125NC A 20mV P V P V - 20mV, OUT DD 120 138 R = 100kI to V /2 L DD Open-Loop Gain (Note 2) AV dB OL 150mV P V P V - 150mV, OUT DD 123 160 R = 5kI to V /2 L DD 2 Maxim Integrated