Evaluation Module Series The A1101R09A-EM1 is a high-performance, interface board with an FCC- certified A1101R09A integrated antenna radio module mounted for quick connection to the Texas Instruments CC1101DK Development Kit. A1101R09A-EM1 Product Overview The A1101R09A-EM1 is an evaluation module The A1101R09A has an RoHS-compliant ENIG with an Anaren A1101R09A radio module in the finish and is packaged on tape & reel or in matrix industrys smallest package (9 x 16 x 2.5mm) tray for high-volume automated manufacturing. mounted on it. This evaluation module is designed specifically for compatibility with SmartRF 04, SmartRF 05 and MAVRK evaluation boards. Each Anaren A1101R09A module is FCC-certified and incorporates the Texas Instruments CC1101 transceiver chip. As a stand-alone module for your final design implementation, Anarens A1101R09A has an LGA pad footprint with an integrated antenna, this module is designed to effortlessly integrate into a wide range of applications, including: industrial control, building automation, low-power wireless sensor networks, lighting control, and automated meter reading. Layout Anaren, Inc. / 6635 Kirkville Road / East Syracuse, NY 13057 800.411.6596 / Nomenclature Pin Diagram Development Kit Connectors A (Anaren) 1 Chip series (CC1101, CC110L, CC2500) 2 Function (R = radio only) 3 Frequency band (x100MHz) 4 Form factor (A = Internal Antenna, C = Connector) 5 Module Type (EM1 = Eval Module, EZ4x = EZ-430 Module, LPF = BoosterPack) Connector P1 Connector P2 To view the entire available family of AIR Modules & Pin 1 GND Pin 1 NC Development options, please visit our website at: Pin 2 NC Pin 2 GND Pin 3 NC Pin 3 NC