A8520 PurePath The A8520E24A91 is a high-performance, FCC & IC certified and ETSI- compliant* radio module that incorporates the Texas Instruments CC8520 PurePath wireless audio SoC, CC2591 Range Extender, and integral antenna all in the industrys smallest package 11 x 19 x 2.5mm. A8520E24A91 Features Benefits Operates in the 2.4GHz ISM band Minimal RF engineering experience necessary FCC, IC and ETSI compliant*, shielded package No additional Intentional Radiator Un-Compressed Wireless Audio Connectivity certification required (FCC CFR 47 Part 15, IC Pre-defined protocol RSS-210) PC-based configurable human interface Operating temperature 40 to +85C Autonomous or host mode operation 100% RF Tested in production Integral Antenna No protocol experience required Integral Range Extender Easily implemented on a two layer PCB 87dBm Sensitivity 20dBm Output Power Applications Exceptional range: (>150M line-of-sight // typical 30m indoor) Consumer Audio, Professional Audio Co-existence with WiFi and Bluetooth systems Portable Audio, Digital Radio 78mA Master current consumption 36mA Slave current consumption PLEASE NOTE: Additional information on the Texas Instruments Available in tape & reel and matrix tray CC8520 and CC2591 devices can be found in the companys latest datasheet releases at Product overview Footprint The A8520E24A91 is a high-performance, FCC & IC certified and ETSI compliant audio module based on the Texas Instruments CC8520 transceiver and CC2591 range extender in the industrys smallest package (11 x 19 x 2.5 mm). The module incorporates the required RF matching & filtering, crystal, integral antenna, and digital line filtering for good noise reduction and sensitivity. The result is quick low power wireless connectivity without having to deal with extensive protocol, RF, antenna design and regulatory compliance thereby providing quick time to market. The modules are 100% tested in production to ensure consistent performance. The A8520E24A91 has an RoHS-compliant ENIG finish and is packaged on tape & reel or in matrix tray for high-volume automated manufacturing. DNC = Do Not Connect Pin diagram Ground Plane Control Nomenclature A (Anaren) 1 Chip series (C1101, CC110L, CC2500, CC8520) 2 Function (R = radio only, E = Range Extender) Caution ESD sensitive device. 3 Frequency band (x 100MHz) Precautions should be used when 4 Form factor (A = Internal Antenna, C = Connector) handling the device in order to 5 Design ID (CC2591) prevent permanent damage. 6 Application (G = General) 7 Packaging (R = Reel, M = Matrix Tray) Anaren, Inc. / 6635 Kirkville Road / East Syracuse, NY 13057 800.411.6596 /