Model C100N50Z4 Surface Mount Termination 100 Watts, 50 Description The C100N50Z4 is high performance Aluminum Nitride (AlN) surface mount termination intended as a cost competitive alternative to Beryllium Oxide (BeO). The termination is well suited to all cellular frequency bands such as AMPS, GSM, DCS, PCS, PHS and UMTS. The high power handling makes the part ideal for terminating high power 90 degree couplers, and for use in microstrip circuits. The termination is also RoHS compliant General Specifications Features: Resistive Element Thick film AlN Ceramic Substrate RoHS Compliant Terminal Finish Matte Tin over Nickel Barrier 100 Watts Operating Temperature -55 to +125 C (see de rating chart) Tolerance is 0.010, unless otherwise specified. Designed to meet or exceed DC 4.0 GHz applicable portions of MIL-E-5400. All dimensions in inches. AlN Ceramic Electrical Specifications Non-Nichrome Resistive Resistance Value: 50 Ohms, 2% Element Power: 100 Watts Low VSWR DC 4.0 GHz Frequency Range: >24 dB DC - 2.7 GHz 100% Tested Return Loss >20 dB DC - 4.0 GHz Specification based on unit properly installed using suggested mounting instructions Small Size and a 50 ohm nominal impedance. Specifications subject to change. Outline Drawing pg. 1 of 2 USA/Canada: (315) 432-8909 Available on Tape and Reel For Pick and Toll Free: (800) 544-2414 Place Manufacturing. +44 2392-232392 Europe: Model C100N50Z4 Typical Performance: Power De-rating: Tape & Reel: *Actual performance could be limited by the solder properties of the application Mounting Footprint and Procedure: pg. 2 of 2 USA/Canada: (315) 432-8909 Available on Tape and Reel For Pick and Place Toll Free: (800) 544-2414 Manufacturing. Europe: +44 2392-232392