C200N50Z4 Anaren

Model C200N50Z4 Surface Mount Termination 200 Watts, 50 Description The C200N50Z4 is high performance Aluminum Nitride (AlN) surface mount termination intended as a cost competitive alternative to Beryllium Oxide (BeO). The termination is well suited to all cellular frequency bands such as; AMPS, GSM, DCS, PCS, PHS and UMTS. The high power handling makes the part ideal for terminating high power 90 degree couplers and for use in microstrip circuits. The termination is also RoHS compliant! General Specifications Features: Resistive Element Thick film Substrate AlN Ceramic RoHS Compliant Terminal Finish Matte Tin over Nickel Barrier 200 Watts Operating Temperature -50 to +200 C (see de rating chart) Tolerance is 0.010, unless otherwise specified. Designed to meet of exceed DC - 2.2 GHz applicable portions of MIL-E-5400. All dimensions in inches. AlN Ceramic Electrical Specifications Non-Nichrome Resistive Resistance Value: 50 Ohms, 2% Element Power: 200 Watts Low VSWR Frequency Range: DC 2.2 GHz Return Loss >20 dB to 2.2 GHz 100% Tested Specification based on unit properly installed using suggested mounting instructions Small Size and a 50 ohm nominal impedance. Specifications subject to change. Outline Drawing UNLESS OTHERWISE SPECIFIED DIMENSIONS ARE IN INCHES 1 of 2 USA/Canada: (315) 432-8909 Available on Tape Toll Free: and Reel For Pick and (800) 544-2414 Place Manufacturing. +44 2392-232392 Europe: Model C200N50Z4 Typical Performance: C200N50Z4 C200N50Z4 Power De-rating: Tape & Reel [Available]: *Actual performance could be limited by the solder properties of the application Mounting Footprint and Procedure: 2 of 2 USA/Canada: (315) 432-8909 Available on Tape and Reel For Pick and Place Toll Free: (800) 544-2414 Manufacturing. Europe: +44 2392-232392