C8A50Z4A Anaren

Model C8A50Z4A Surface Mount Termination 8 Watts, 50 Description The C8A50Z4A is high performance Alumina (Al 0 ) Surface Mount 2 3 termination intended as a low cost alternative to Aluminum Nitride (AlN). The termination is well suited to all cellular frequency bands such as AMPS, GSM, DCS, PCS, PHS and UMTS. The termination is also RoHS compliant General Specifications Features: Resistive Element Thick film RoHS Compliant Substrate Al O Ceramic 2 3 Terminal Finish Matte Tin over Nickel Barrier 8 Watts Operating Temperature -55 to +125 C (see de rating chart) DC 6.0 GHz Tolerance is 0.010, unless otherwise specified. Designed to meet or exceed applicable portions of MIL-E-5400. All dimensions in inches. Al 0 Ceramic 2 3 Electrical Specifications Non-Nichrome Resistive Resistance Value: 50 Ohms, 2% Element 8 Watts Power: Low VSWR Frequency Range: DC 6.0 GHz 100% Tested Return Loss >19 dB Specification based on unit properly installed using suggested mounting instructions Small Size and a 50 ohm nominal impedance. Specifications subject to change. Outline Drawing HATCHED AREA(S) INDICATE LOCATION OF PLATED SURFACES UNLESS OTHERWISE SPECIFIED DIMENSIONS ARE IN INCHES 1 of 2 USA/Canada: (315) 432-8909 Toll Free: (800) 544-2414 +44 2392-232392 Europe: Model C8A50Z4A Typical Performance: C8A50Z4A C8A50Z4A Power De-rating: Mounting Footprint and Procedure: *Actual performance could be limited by the solder properties of the application Tape and Reel: 2 of 2 USA/Canada: (315) 432-8909 Toll Free: (800) 544-2414 Europe: +44 2392-232392