Model C8A50Z4B Rev B Surface Mount Termination 8 Watts, 50 Description The C8A50Z4B is high performance Alumina (Al 0 ) Surface Mount 2 3 termination intended as a low cost alternative to Aluminum Nitride (AlN). The termination is well suited to all cellular frequency bands such as AMPS, GSM, DCS, PCS, PHS and UMTS. The termination is also RoHS compliant General Specifications Features: Resistive Element Thick film RoHS Compliant Substrate Al2O3 Ceramic 8 Watts Terminal Finish Matte Tin over Nickel Barrier DC 6.0 GHz Operating Temperature -55 to +125 C (see de rating chart) Tolerance is 0.010, unless otherwise specified. Designed to meet or exceed Al 0 Ceramic 2 3 applicable portions of MIL-E-5400. All dimensions in inches. Non-Nichrome Resistive Electrical Specifications Element Resistance Value: 50 Ohms, 2% Low VSWR Power: 8 Watts 100% Tested Frequency Range: DC 6.0 GHz Return Loss >19 dB Small Size Specification based on unit properly installed using suggested mounting instructions and a 50 ohm nominal impedance. Specifications subject to chan Outline Drawing UNLESS OTHERWISE SPECIFIED DIMENSIONS ARE IN INCHES 1 of 2 USA/Canada: (315) 432-8909 Toll Free: (800) 544-2414 Europe: +44 2392-232392 Model C8A50Z4B Typical Performance: C8A50Z4B C8A50Z4B Power De-rating: Tape and Reel: *Actual performance could be limited by the solder properties of the application Mounting Footprint and Procedure: 2 of 2 USA/Canada: (315) 432-8909 Toll Free: (800) 544-2414 Europe: +44 2392-232392