M10382-A1 Antenova

GPS RADIONOVA RF Antenna Module Part No. M10382 Product Specification Applications Personal Navigation Devices (PNDs) Feature phones / Smart phones Portable Media Players (PMPs) Tablet PCs / eReaders Personal Digital Assistants (PDAs) Asset Tracking / Personal Safety Features Functional Block Diagram Low cost single package GPS RF antenna module u-blox 6 GPS Position Engine Low 3.9mm height for thin devices Low current consumption Easy to use drop-in solution Novel external matching ensure easy tuning for each platform Anti-jamming technology Product Description Package Style 24.2 x 9.9mm RF Antenna Module Antenova M2Ms GPS RADIONOVA M10382 is a single package solution that combines a full GPS engine and antenna on a small SMD module. The Top View M10382 is a highly integrated GPS RF Antenna Module suitable for L1-band GPS and A-GPS systems. The device combines the high performance u- blox 6 GPS position engine with A nte no vas high efficiency antenna technology in a small SMD module. M10382 also benefits from novel external Component side view (w/o shielding can) matching that ensures easy tuning for each platform. All front-end and receiver components are contained in a single package laminate base module, providing a complete GPS receiver for optimum performance. The M10382 operates on 1.8V or 3.3V positive supply with low power consumption and several low power Bottom View modes for further power savings. An accurate 0.5ppm TCXO and very low noise LNA ensures high sensitivity and short TTFF. The M10382 is supported by u-blox stand alone software and is compatible with UART, 2 SPI, DDC, I C and USB host processor interfaces. Antennas for Wireless M2M Applications 1 Product Specification 11MD-0043-5-PS GPS RADIONOVA RF Antenna Module Part No. M10382 Absolute Maximum Ratings Symbol Parameter Min Max Unit VCC Main Supply Voltage -0.5 3.6 V V BCKP Battery backup voltage -0.5 3.6 V VIO Supply voltage I/O ring -0.5 3.6 V VDD USB Supply voltage USB -0.5 3.6 V V TH Input Voltage Reset Threshold level -0.5 3.6 V VI Input Voltage on any digital I/O pin with -0.5 3.6 V DIG respect to ground LNA IN RF Input Power at ANT IN -25 dBm T Storage Temperature -40 +125 C STG I DC Current through any digital I/O pin 10 mA PIN (except supplies) P Total Power Dissipation 500 mW TOT ESD Electrostatic Discharge Immunity (HBM) -2.0 +2.0 kV * Exposure to absolute ratings may adversely affect reliability and may cause permanent damage. Recommended Operating Conditions Symbol Parameter Min Typ Max Unit Ta Ambient Temperature -40 +25 +85 C VCC (1V8) 1V8 Supply Voltage Mode 1.75 1.8 1.89 V VCC (3V3) 3V3 Supply Voltage Mode 2.5 3.3 3.6 V VCC (USB) USB Supply Voltage Mode 2.5 3.3 3.6 V V-BCKP Battery backup voltage 1.4 3.6 V VIO Supply voltage I/O ring 1.65 3.3 3.6 V VDD USB Supply voltage USB 3.0 3.3 3.6 V .DC Electrical Characteristics Conditions: Ta = 25 C Symbol Parameter Min Typ Max Unit ICC Total Supply Current - Acquisition Mode 52 mA ACQ Tracking - Max Performance Mode 45 mA ICC Tracking - Eco Mode 42 mA TRK Tracking - Power Save Mode mA 22 I Battery backup current 25 A BCKP Current consumption is very dynamic and can peak at 100mA. The value given is the average over 1 minute. At 1fix/s Antennas for Wireless M2M Applications 2 Product Specification 11MD-0043-5-PS