RoHS Recast Compliant M.2 2280 Anti-Sulfuration Solid State Drive SV250-M280 Product Specifications April 29, 2021 Version 1.0 Apacer Technology Inc. 1F, No.32, Zhongcheng Rd., Tucheng Dist., New Taipei City, Taiwan, R.O.C Tel: +886-2-2267-8000 Fax: +886-2-2267-2261 www.apacer.com Specifications Overview: Compliance with SATA Revision 3.2 Temperature Range SATA 6 Gb/s interface Operating: ATA-8 command set Standard: 0C to 70C Backward compatible with SATA 1.5/3 Gb/s Wide: -40C to 85C Storage: -40C to 100C Capacity Supply Voltage Single side: 30, 60, 120, 240, 480 GB Double side: 960 GB 3.3 V 5% Performance* Power Consumption* Burst read/write: 600 MB/sec Active mode: 450 mA Sequential read: Up to 560 MB/sec Idle mode: 70 mA Sequential write: Up to 520 MB/sec Connector Type Random read (4K): Up to 51,000 IOPS 75-pin SATA-based M.2 module pinout Random write (4K): Up to 73,000 IOPS NAND Flash Type: 3D TLC (BiCS3) Flash Management MTBF: >3,000,000 hours Low-Density Parity-Check (LDPC) Code SATA Power Management Modes Global Wear Leveling Flash bad-block management Form Factor Flash Translation Layer: Page Mapping M.2 2280-D5-B-M S.M.A.R.T. Dimensions: TM DataDefender Single side: 80.00 x 22.00 x 2.38, unit: mm Device Sleep Double side: 80.00 x 22.00 x 3.88, unit: mm ATA Secure Erase Net Weight: 6.48 g 5% TRIM Reliability Hyper Cache Technology Thermal Sensor Over-Provisioning End-to-End Data Protection TM DataRAID Anti-Sulfuration TM SMART Read Refresh Security Endurance (in drive writes per day: DWPD) AES 256-bit hardware encryption 30 GB: 3.27 DWPD LED Indicators for Drive Behavior 60 GB: 3.45 DWPD RoHS Recast Compliant (Complies with 120 GB: 3.4 DWPD 2011/65/EU Standard) 240 GB: 3.34 DWPD 480 GB: 3.4 DWPD 960 GB: 3.35 DWPD *Varies from capacities. The values for performances and power consumptions presented are typical and may vary depending on flash configurations or platform settings. The term idle refers to the standby state of the device. 1 2021 Apacer Technology Inc.