RoHS Recast Compliant Serial ATA Flash Drive SV250-300 Product Specifications May 6, 2019 Version 1.2 Apacer Technology Inc. 1F, No.32, Zhongcheng Rd., Tucheng Dist., New Taipei City, Taiwan, R.O.C Tel: +886-2-2267-8000 Fax: +886-2-2267-2261 www.apacer.com Specifications Overview: Compliance with SATA Interface Temperature Range Serial ATA Revision 3.1 Operating: SATA 6.0 Gbps Standard: 0C to 70C ATA-8 command set Wide: -40C to 85C Backward compatible with SATA 1.5/3.0 Gbps Storage: -40C to 100C Capacity Supply Voltage 30, 60, 120, 240, 480 GB 3.3 V 5% Performance* Power Consumption* Burst read/write: 600 MB/sec Active mode: 425 mA Sequential read: Up to 560 MB/sec Idle mode: 115 mA Sequential write: Up to 515 MB/sec Connector Type Random read (4K): Up to 67,000 IOPS 52-pin mSATA connector Random write (4K): Up to 75,000 IOPS SATA Power Management Modes Flash Management Form Factor Low-Density Parity-Check (LDPC) Code JEDEC MO-300 Global Wear Leveling Dimensions: 50.80 x 29.85 x 4.85, unit: mm Flash bad-block management Net Weight: 7.17g Flash Translation Layer: Page Mapping Reliability S.M.A.R.T. TM Thermal Sensor DataDefender Security Devslp ATA Secure Erase Trusted Computing Group (TCG) Opal 2.0 (optional) TRIM AES 256-bit hardware encryption Hyper Cache Technology End-to-End Data Protection Over-Provisioning TM** Shock & Vibration*** DataRAID TM Shock: 1,500 G SMART Read Refresh Vibration: 15 G NAND Flash Type: 3D TLC (BiCS3) LED Indicators for Drive Behavior MTBF: >1,000,000 hours Write Protect Switch (optional) Endurance (in drive writes per day: DWPD) RoHS Recast Compliant (Complies with 30 GB: 3.09 DWPD 2011/65/EU Standard) 60 GB: 3.24 DWPD 120 GB: 3.31 DWPD 240 GB: 3.34 DWPD 480 GB: 3.24 DWPD *Varies from capacities. The values for performances and power consumptions presented are typical and may vary depending on flash configurations or platform settings. The term idle refers to the standby state of the device. **Only supported on 60-480GB model ***Non-operating 1 2019 Apacer Technology Inc.