RoHS Recast Compliant Serial ATA Flash Drive SV250-300 Product Specifications November 8, 2021 Version 2.0 Apacer Technology Inc. 1F, No.32, Zhongcheng Rd., Tucheng Dist., New Taipei City, Taiwan, R.O.C Tel: +886-2-2267-8000 Fax: +886-2-2267-2261 www.apacer.com Specifications Overview: Compliance with SATA Revision 3.2 Temperature Range SATA 6 Gb/s interface Operating: ATA-8 command set Standard: 0C to 70C Backward compatible with SATA 1.5/3 Gb/s Wide: -40C to 85C Storage: -55C to 100C Capacity Supply Voltage 30, 60, 120, 240, 480 GB 3.3 V 5% Performance* Burst read/write: 600 MB/sec Power Consumption* Sequential read: Up to 560 MB/sec Active mode: 390 mA Sequential write: Up to 515 MB/sec Idle mode: 70 mA Random read (4K): Up to 56,000 IOPS Connector Type Random write (4K): Up to 71,000 IOPS 52-pin mSATA connector Flash Management SATA Power Management Modes Low-Density Parity-Check (LDPC) Code Form Factor Global Wear Leveling JEDEC MO-300 Flash bad-block management Dimensions: 50.80 x 29.85 x 4.85, unit: mm Flash Translation Layer: Page Mapping Net Weight: 7.17g 5% S.M.A.R.T. TM Security DataDefender Trusted Computing Group (TCG) Opal 2.0 Device Sleep (optional) ATA Secure Erase AES 256-bit hardware encryption TRIM Reliability Hyper Cache Technology Thermal Sensor Over-Provisioning TM** End-to-End Data Protection DataRAID TM LED Indicators for Drive Behavior SMART Read Refresh NAND Flash Type: 3D TLC (BiCS3) Write Protect Switch (optional) MTBF: >3,000,000 hours RoHS Recast Compliant (Complies with 2011/65/EU Standard) Endurance (in drive writes per day: DWPD) 30 GB: 3.27 DWPD 60 GB: 3.45 DWPD 120 GB: 3.27 DWPD 240 GB: 3.45 DWPD 480 GB: 3.3 DWPD *Varies from capacities. The values for performances and power consumptions presented are typical and may vary depending on flash configurations or platform settings. The term idle refers to the standby state of the device. **Supported on standard model of all capacities and TCG Opal-supported model of 120-480GB capacities. 1 2021 Apacer Technology Inc.