RoHS Compliant Serial ATA Flash Drive SV250-25 Product Specifications March 29, 2019 Version 1.1 Apacer Technology Inc. 1F, No.32, Zhongcheng Rd., Tucheng Dist., New Taipei City, Taiwan, R.O.C Tel: +886-2-2267-8000 Fax: +886-2-2267-2261 www.apacer.com Specifications Overview: Compliance with SATA Revision 3.2 Temperature Range SATA 6.0 Gbps interface Operating: Backward compatible with SATA 1.5 and Standard: 0C to 70C 3.0 Gbps interfaces Wide: -40C to 85C ATA-8 command set Storage: -40C to 100C Capacity Supply Voltage 30, 60, 120, 240, 480 GB 5.0 V 10% Performance* Power Consumption* Burst read/write: 600 MB/sec Active mode: 385 mA Sequential read: Up to 560 MB/sec Idle mode: 100 mA Sequential write: Up to 520 MB/sec Connector Type Random read (4K): Up to 66,000 IOPS 7-pin SATA signal connector Random write (4K): Up to 74,000 IOPS 15-pin SATA power connector Flash Management Form Factor Low-Density Parity-Check (LDPC) Code 2.5 Global Wear Leveling Dimensions: 100.00 x 69.85 x 6.90, unit: mm Flash bad-block management Net Weight: 53 g Flash Translation Layer: Page Mapping Shock & Vibration*** S.M.A.R.T. TM DataDefender Shock: 1,500 G ATA Secure Erase Vibration: 15 G DevSlp NAND Flash Type: 3D TLC (BiCS3) TRIM MTBF: >1,000,000 hours Hyper Cache Technology SATA Power Management Modes Over-Provisioning TM Reliability DataRAID ** TM SMART Read Refresh Thermal Sensor Endurance (in drive writes per day: DWPD) Security 30 GB: 3.09 DWPD Trusted Computing Group (TCG) Opal 2.0 (optional) 60 GB: 3.24 DWPD AES 256-bit hardware encryption 120 GB: 3.31 DWPD End-to-End Data Protection 240 GB: 3.34 DWPD RoHS Compliant 480 GB: 3.24 DWPD *Varies from capacities. The values for performances and power consumptions presented are typical and may vary depending on flash configurations or platform settings. The term idle refers to the standby state of the device. **Only supported on 60-480GB model ***Non-operating 1 2019 Apacer Technology Inc.