Halogen-free CompactFlash Series 5 Specifications for Industrial CompactFlash Card th December 4 , 2013 Version 1.3 Apacer Technology Inc. 1F, No.32, Zhongcheng Rd., Tucheng Dist., New Taipei City, Taiwan, R.O.C Tel: +886-2-2267-8000 Fax: +886-2-2267-2261 www.apacer.com Compact Flash 5 series AP-CFxxxxRXXS-XXXXXXA Features: CompactFlash Association Specification Temperature ranges Revision 4.1 Standard Interface 0C to 70C for operation (Standard) 512 bytes per sector -40C to 85C for operation (Extended) ATA command set compatible -40C to 100C for storage ATA transfer mode supports: Operating voltage PIO Mode 6 3.3 V Multiword DMA Mode 4 5.0 V Ultra DMA Mode 5 PCMCIA UDMA Mode 5 Power consumption (typical)** Active mode: 175 mA Capacities Standby mode: 3 mA 128, 256, 512 MB 1, 2, 4, 8, 16, 32, 64 GB Connector Type 50 pins female Performance Sustained read: Up to 55 MB/sec Physical Dimensions Sustained write: Up to 42 MB/sec 36.4mm x 42.8mm x 3.3mm Intelligent ATA/IDE module Endurance (TBW: Terabytes Written) Wear-leveling algorithms to substantially 128 MB: 0.5 TBW increase longevity of flash media 256 MB: 1.1 TBW Built-in BCH ECC capable of correcting 512 MB: 2.3 TBW up to 24 bits in 1,024 byte data 1 GB: 4.5 TBW Flash block management 2 GB: 9.1 TBW Power failure management 4 GB: 18.2 TBW Supports S.M.A.R.T commands 8 GB: 36.5 TBW 16 GB: 73.0 TBW NAND Flash Type: SLC 32 GB: 146.0 TBW 64 GB: 292.1 TBW Halogen free *Performance and power consumption may vary depending on host system configurations. 1 2013 Apacer Technology Inc. Rev. 1.3