RoSTD Compliant CFast 2 STD CFast 2 STD Product Specifications th August 29 , 2014 Version 1.0 Apacer Technology Inc. 1F, No.32, Zhongcheng Rd., Tucheng Dist., New Taipei City, Taiwan, R.O.C Tel: +886-2-2267-8000 Fax: +886-2-2267-2261 www.apacer.com CFast 2 STD AP-CFAxxxxACXN-XAT Features: Standard Serial ATA Interface Temperature ranges SATA Revision 3.1 compliance Operating: SATA 6.0 Gbps interface speed Standard: 0C to 70C Backward compatible with SATA 1.5 Extended: -40C to 85C and 3.0 Gbps interfaces Storage: -40C to 100C ATA-compatible command set Flash Management Connector type Built-in hardware ECC, enabling up to 7 + 17 pin female connector 40-bit correction per 1K bytes Static/dynamic wear-leveling Power consumption (typical)* Flash bad-block management Supply voltage: 3.3V S.M.A.R.T. Active mode: 280 mA Power Failure Management Idle mode: 85 mA ATA Secure Erase Performance* TRIM Sustained read: Up to 80 MB/sec RoHS Compliant Sustained write: Up to 80 MB/sec Write Protect switch (optional) Capacity 2, 4, 8, 16, 32, 64 GB NAND Flash Type: SLC MTBF: >2,000,000 hours *Vary from capacities. The values presented in Power consumption and Performances are typical, and may vary depending on different settings and platforms. 1 2014 Apacer Technology Inc. Rev. 1.0