RoHS Compliant CFast 2.0 SS220-CFast 2.0 Product Specifications March 17, 2021 Version 1.6 Apacer Technology Inc. 1F, No.32, Zhongcheng Rd., Tucheng Dist., New Taipei City, Taiwan, R.O.C Tel: +886-2-2267-8000 Fax: +886-2-2267-2261 www.apacer.com Specifications Overview: Standard Serial ATA Interface Temperature Range SATA Revision 3.1 compliance Operating: SATA 6 Gb/s interface speed Standard: 0C to 70C Backward compatible with SATA 1.5 and Wide: -40C to 85C 3 Gb/s interfaces Storage: -40C to 100C ATA-compatible command set Supply Voltage Capacity 3.3 V 5% 4, 8, 16, 32, 64 GB Power Consumption* Performance* Active mode: 510 mA Sequential read: Up to 560 MB/sec Idle mode: 90 mA Sequential write: Up to 450 MB/sec Connector Type Random read (4K): Up to 81,000 IOPS 7 + 17 pin female connector Random write (4K): Up to 77,000 IOPS Write Protect Flash Management Built-in hardware ECC RoHS Compliant Global Wear Leveling Flash bad-block management Flash Translation Layer: Page Mapping S.M.A.R.T. Power Failure Management Device Sleep (optional) ATA Secure Erase TRIM NAND Flash Type: SLC MTBF: >3,000,000 hours Endurance (in Terabytes Written: TBW) 4 GB: 186 TBW 8 GB: 267 TBW 16 GB: 535 TBW 32 GB: 1,329 TBW 64 GB: 2,659 TBW *Varies from capacities. The values for performances and power consumptions presented are typical and may vary depending on flash configurations or platform settings. 1 2021 Apacer Technology Inc.