RoHS Compliant CFast 2.0 SS220-CFast 2.0 Product Specifications September 5, 2017 Version 1.6 Apacer Technology Inc. 1F, No.32, Zhongcheng Rd., Tucheng Dist., New Taipei City, Taiwan, R.O.C Tel: +886-2-2267-8000 Fax: +886-2-2267-2261 www.apacer.com SS220-CFast 2.0 AP-CFAxxxGGDAD-X4XT Features: Standard Serial ATA Interface Temperature Range SATA Revision 3.1 compliance Operating: SATA 6.0 Gbps interface speed Standard: 0C to 70C Backward compatible with SATA 1.5 and Extended: -40C to 85C 3.0 Gbps interfaces Storage: -40C to 100C ATA-compatible command set Power Consumption* Capacity Supply voltage: 3.3V 8, 16, 32, 64 GB Active mode: 570 mA Idle mode: 75 mA Flash Management Built-in hardware ECC Connector Type Global Wear Leveling 7 + 17 pin female connector Flash bad-block management Device Sleep Mode (optional) Flash Translation Layer: Page Mapping S.M.A.R.T. RoHS Compliant Power Failure Management ATA Secure Erase TRIM Performance* Sequential read: Up to 520 MB/sec Sequential write: Up to 455 MB/sec Random read (4K): up to 79,000 IOPS Random write (4K): up to 80,000 IOPS NAND Flash Type: SLC MTBF: >2,000,000 hours *Varies from capacities. The values presented in Power consumption and Performances are typical, and may vary depending on different settings and platforms. 1 2017 Apacer Technology Inc. Rev. 1.6