RoHS Recast Compliant ATA Disk Module ADM5S 44P/270D Product Specifications March 30, 2016 Version 1.2 Apacer Technology Inc. 1F, No.32, Zhongcheng Rd., Tucheng Dist., New Taipei City, Taiwan, R.O.C Tel: +886-2-2267-8000 Fax: +886-2-2267-2261 www.apacer.com ATA Disk Module AP-FMxxxxD30XXS-XTX Features: Standard ATA/IDE Bus Interface Temperature Range ATA command set compatible Operation: Compliant with ATA/ATAPI-8 Standard: 0C to 70C ATA operating mode supports up to: Extended: -40 to 85C PIO Mode up to 4 Storage: -40C to 100C Multiword DMA Mode up to 2 Form Factor Ultra DMA Mode up to 6 ATA Disk Module Connector Type Dimension: 45.0 x 28.0 x 6.85, unit: mm 44-pin female connector (2.00mm pitch) Flash Management Power Consumption* Advanced wear-leveling algorithms Supply voltage: 3.3V & 5V Built-in hardware ECC Active mode: 265 mA Flash block management Idle mode: 5 mA Power failure management Performance* ATA Secure Erase Sustained read: Up to 75 MB/sec S.M.A.R.T. Technology Sustained write: Up to 65 MB/sec Shock & Vibration** Capacity Shock: 1,500 G 128, 256, 512 MB Vibration: 15 G 1, 2, 4, 8, 16, 32, 64 GB Master/Slave Switch (optional) NAND Flash Type: SLC RoHS Recast Compliant (2011/65/EU) MTBF: > 2,000,000 hours *Performance and power consumption addressed here are typical and may vary from flash configurations or platforms. **Non-operating 1 2016 Apacer Technology Inc. Rev. 1.2