RoHS Compliant Value Added ATA Disk Module Specification for Mini ADM III (44P/180D) Middle Profile March 3, 2011 Version 1.1 Apacer Technology Inc. th th 4 Fl., 75 Xintai 5 Rd., Sec.1, Hsichih, New Taipei City, Taiwan 221 Tel: +886-2-2698-2888 Fax: +886-2-2698-2889 www.apacer.com Value Added ATA-Disk Module AP-FMxxxxE2XXXS-MPXXXJ Features: Standard ATA/IDE bus interface Temperature ranges 512 bytes per sector Operation: ATA command set compatible Standard: 0C to 70C ATA operating mode supports up to: ET*: -40C to 85C PIO Mode-4 Storage: -40C to 100C Multiword DMA Mode-2 Flash management Ultra DMA Mode-4 Intelligent endurance design Connector type Advanced wear-leveling algorithms 44-pin female connector S.M.A.R.T. technology Built-in hardware ECC Low power consumption (typical) Enhanced data integrity Supply voltage: 3.3V & 5V Intelligent power failure recovery Active mode: 85 mA/95 mA (3.3V/5.0V) Enhanced security level Sleep mode: 500A /600A (3.3V/5.0V) Secure protection zone ATA Secure Erase Performance Sustained read: Up to 35 MB/sec RoHS compliant Sustained write: Standard: Up to 10 MB/sec High Speed: Up to 10 MB/sec Capacity Standard: 128, 256, 512 MB 1, 2, 8 GB High Speed: 256, 512 MB 1, 2, 4 GB NAND Flash Type: SLC *Extended Temperature 2 2011 Apacer Technology Inc. Rev. 1.1