Value Added ATA-Disk Module AP-FMxxxxEA4SXS-QTX RoHS Compliant Value Added ATA Disk Module Specifications for Mini ADM III (44P/270D) th August 8 , 2013 Revision 1.4 Apacer Technology Inc. 1F, No.32, Zhongcheng Rd., Tucheng Dist., New Taipei City, Taiwan, R.O.C Tel: +886-2-2267-8000 Fax: +886-2-2267-2261 www.apacer.com 1 2013 Apacer Technology Inc. Rev. 1.4 Value Added ATA-Disk Module AP-FMxxxxEA4SXS-QTX Features: Standard ATA/IDE Bus Interface Temperature ranges ATA command set compatible Operating: ATA operating mode supports up to: Standard: 0C to 70C PIO Mode-4 Extended: -40C to 85C Multiword DMA Mode-2 Storage: -40C to 100C Ultra DMA Mode-4 Flash management Connector type Advanced wear-leveling algorithms 44-pin female connector S.M.A.R.T. technology Built-in hardware ECC Power consumption (typical)* Flash block management Supply voltage: 3.3V & 5V Power failure management Active mode: 85mA/95mA (3.3V/5V) ATA Security Erase Sleep mode: 500A /600A (3.3V/5V) Form factor Performance* ATA Disk Module (44-pin/270-degree ) Sustained read: Up to 21 MB/sec Dimensions: 45.00x32.60x7.30, unit: Sustained write: Up to 15 MB/sec mm Capacity Shock & Vibration** 128, 256, 512 MB Shock: 1,500 G 1, 2, 4, 8, 16 GB Vibration: 15 G NAND flash type: SLC RoHS compliant Endurance (TBW: Terabytes Written) 128 MB: 3.5 TBW 256 MB: 6.9 TBW 512 MB: 14.0 TBW 1 GB: 27.4 TBW 2 GB: 45.5 TBW 4 GB: 54.7 TBW 8 GB: 80.6 TBW 16 GB: 129.8 TBW *Varies from capacities. The values addressed for Performance and Power consumptions are typical and may vary depending on settings and platforms. **Non-operating 2 2013 Apacer Technology Inc. Rev. 1.4