RoHS Compliant Industrial Secure Digital Card Product Specifications nd September 22 , 2014 Version 1.4 Apacer Technology Inc. 1F, No.32, Zhongcheng Rd., Tucheng Dist., New Taipei City, Taiwan, R.O.C Tel: +886-2-2267-8000 Fax: +886-2-2267-2261 www.apacer.com Industrial Secure Digital Card AP-ISDxxxXXXX-2CM FEATURES: Variable clock rate 0-50MHz Fully compatible with SD card standard specification Intelligent endurance design - SD Memory Card Specifications, Part 1, - Built-in BCH-ECC supports correction up Physical Layer Specification, Version 2.00 to 24 bits data error per 1K bytes data automatically - SD Memory Card Specifications, Part 2, File System Specification, Version 2.00 - Implements global wear-leveling algorithms to substantially increase - SD Memory Card Specifications, Part 3, longevity of flash media Security Specification, Version 2.00 - Flash bad-block management Capacity - S.M.A.R.T utility - 4, 8, 16, 32 GB Temperature ranges Performance - Operating temperature - Sustained read: Up to 19 MB/sec Standard 0C ~ 70C - Sustained write: Up to 8 MB/sec Extended -40C ~ 85C SD-protocol compatible - Storage temperature: -40C ~ 85C Support SPI mode Power consumption (typical) - Read: 35 mA NAND Flash Type: MLC - Write: 55 mA Physical dimension: 24 x 32 x 2.1 - Standby: 80 A Operation voltage: 2.7V ~ 3.6V RoHS Compliant Note: The values addressed here for Performance and Power consumption are typical and may vary depending on configurations and platforms. 1 2014 Apacer Technology, Inc. Rev. 1.4