RoHS Compliant Serial ATA Flash Drive SS210-300 Product Specifications July 4, 2017 Version 1.3 Apacer Technology Inc. 1F, No.32, Zhongcheng Rd., Tucheng Dist., New Taipei City, Taiwan, R.O.C Tel: +886-2-2267-8000 Fax: +886-2-2267-2261 www.apacer.com Serial ATA Flash Drive APMxxxGMFXX-4BTXX Features: Compliance with SATA Revision 3.1 Temperature Range SATA 6.0 Gbps interface Operating: Backward compatible with SATA 1.5 and Standard: 0C to 70C 3.0 Gbps interfaces Extended: -40C to 85C ATA-8 command set Storage: -40C to 100C Capacity Supply Voltage 2, 4, 8, 16, 32, 64, 128 GB 3.3 V 5% Performance* Power Consumption* Burst read/write: 600 MB/sec Active mode: 890 mA Sequential read: up to 530 MB/sec Idle mode: 195 mA Sequential write: up to 450 MB/sec Form Factor Random read 4K: up to 82,000 IOPS JEDEC MO-300 Random write 4K: up to 77,000 IOPS Dimensions (50.80 x 29.85 x 3.8, unit: ) Flash Management Shock & Vibration** Built-in hardware ECC Shock: 1,500 G Global Wear Leveling Vibration: 15 G Flash bad-block management Flash Translation Layer: Page Mapping DRAM Cache for Enhanced Random S.M.A.R.T. Performance Power Failure Management SATA Power Management Modes ATA Secure Erase TRIM Device Sleep Mode NAND Flash Type: SLC Thermal Sensor MTBF: >2,000,000 hours LED Indicators for Drive Behavior Endurance (in Terabytes Written: TBW) Write Protect Switch (optional) 2 GB: 80 TBW RoHS Compliant 4 GB: 160 TBW 8 GB: 320 TBW 16 GB: 641 TBW 32 GB: 1,282 TBW 64 GB: 2,565 TBW 128 GB: 5,131 TBW *Varies from capacities. The values addressed here are typical and may vary depending on settings and platforms. **Non-operating 1 2017 Apacer Technology Inc. Rev. 1.3