RoHS Compliant Serial ATA Flash Drive SM210-300 Product Specifications (Toshiba 15nm) December 25, 2019 Version 1.4 Apacer Technology Inc. 1F, No.32, Zhongcheng Rd., Tucheng Dist., New Taipei City, Taiwan, R.O.C Tel: +886-2-2267-8000 Fax: +886-2-2267-2261 www.apacer.com Specifications Overview: Compliance with SATA Revision 3.1 Temperature Range SATA 6.0 Gbps interface Operating: Backward compatible with SATA 1.5 and Standard: 0C to 70C 3.0 Gbps interfaces Wide: -40C to 85C ATA-8 command set Storage: -40C to 100C Capacity Supply Voltage 8, 16, 32, 64, 128, 256, 512 GB 3.3 V 5% Performance* Power Consumption* Burst read/write: 600 MB/sec Active mode: 975 mA Sequential read: Up to 560 MB/sec Idle mode: 85 mA Sequential write: Up to 485 MB/sec Random read (4K): Up to 82,000 IOPS Form Factor Random write (4K): Up to 77,000 IOPS JEDEC MO-300 Flash Management Dimensions: 50.80 x 29.85 x 3.80, unit: mm Built-in hardware ECC Shock & Vibration** Global Wear Leveling Shock: 1,500 G Flash bad-block management Vibration: 15 G Flash Translation Layer: Page Mapping NAND Flash Type: MLC S.M.A.R.T. Power Failure Management MTBF: >1,000,000 hours Device Sleep Reliability*** ATA Secure Erase TRIM Thermal Sensor Endurance (in Terabytes Written: TBW) DRAM Cache for Enhanced Random Performance 8 GB : 14 TBW 16 GB: 27 TBW SATA Power Management Modes 32 GB: 61 TBW Write Protect Switch (optional) 64 GB: 129 TBW 128 GB: 277 TBW LED Indicators for Drive Behavior 256 GB: 587 TBW RoHS Compliant 512 GB: 1,035 TBW *Varies from capacities. The values for performances and power consumptions presented are typical and may vary depending on flash configurations or platform settings. The term idle refers to the standby state of the device. **Non-operating ***Built-in feature for wide temperature products optional feature for standard temperature products. 1 2019 Apacer Technology Inc.