RoHS Recast Compliant Serial ATA Flash Drive M.2 2242 P100-M Product Specifications October 5, 2015 Version 1.5 Apacer Technology Inc. 1F, No.32, Zhongcheng Rd., Tucheng Dist., New Taipei City, Taiwan, R.O.C Tel: +886-2-2267-8000 Fax: +886-2-2267-2261 www.apacer.com M.2 2242 Flash Drive APM2T42P100xxxxAN-XTMX Features: z Compliance with SATA Interface z Temperature ranges Serial ATA Revision 3.1 Operating: SATA 6.0 Gbps Standard : 0C to 70C ATA-8 command set Extended : -40C to 85C Backward compatible with SATA 1.5/3.0 Storage: -40C to 100C Gbps z Supply voltage z Capacities 3.3 V 5% 8, 16, 32, 64, 128, 256 GB z Power consumption (typical)* z Performance* Active mode: 535 mA Interface burst read/write: 600 MB/sec Idle mode: 105 mA Sustained read: up to 520 MB/sec z Connector type Sustained write: up to 180 MB/sec 75-pin SATA-based M.2 module pinout z Flash Management z Form factor Built-in hardware ECC M.2 2242 form factor Wear-leveling Dimensions: Flash bad-block management 42mm(L)x22mm(W)x3.65mm(H) S.M.A.R.T. Power Failure Management z Shock & Vibration** ATA Secure Erase Shock:1500 G TRIM Vibration: 15 G z NAND Flash Type: MLC z MTBF: >2,000,000 hours z Endurance z RoHS Recast compliant 8 GB: 7 TBW z Device Sleep mode (optional) 16 GB: 14 TBW 32 GB: 28 TBW 64 GB: 57 TBW 128 GB: 114 TBW 256 GB: 228 TBW *Varies from capacities. The values for performances and power consumptions presented are typical and may vary depending on flash configurations or platform settings. The term idle refers to the standby state of the device. **Non-operating 1 2015 Apacer Technology Inc. Rev. 1.5