RoHS Recast Compliant M.2 2242 Flash Drive P100 Product Specifications March 15, 2016 Version 1.5 Apacer Technology Inc. 1F, No.32, Zhongcheng Rd., Tucheng Dist., New Taipei City, Taiwan, R.O.C Tel: +886-2-2267-8000 Fax: +886-2-2267-2261 www.apacer.com M.2 2242 Flash Drive APM2T42P100xxxGAN-XTX Features: Compliance with SATA Interface Temperature Range Serial ATA Revision 3.1 Operating: SATA 6.0 Gbps Standard: 0C to 70C ATA-8 command set Extended: -40C to 85C Backward compatible with SATA 1.5/3.0 Storage: -40C to 100C Gbps Supply Voltage Capacity 3.3 V 5% 8, 16, 32, 64 GB Power Consumption* Performance* Active mode: 440 mA Interface burst read/write: 600 MB/sec Idle mode: 105 mA Sustained read: up to 500 MB/sec Connector Type Sustained write: up to 150 MB/sec 75-pin SATA-based M.2 module pinout Flash Management Form Factor Built-in hardware ECC M.2 2242 form factor Static/dynamic wear-leveling Dimensions: 42.00 x 22.00 x 3.65, unit: mm Flash bad-block management S.M.A.R.T. Shock & Vibration** Power failure management Shock:1,500 G ATA secure erase Vibration: 15 G TRIM MTBF: >2,000,000 hours NAND Flash Type: SLC SATA Power Management Endurance Device Sleep Mode (optional) 8 GB: 140 TBW 16 GB: 280 TBW RoHS Recast Compliant (complies with 32 GB: 560 TBW 2011/65/EU standard) 64 GB: 1120 TBW *Varies from capacities. The values for performances and power consumptions presented are typical and may vary depending on flash configurations or platform settings. The term idle refers to the standby state of the device. **Non-operating 1 2016 Apacer Technology Inc. Rev. 1.5