RoHS Recast Compliant
M.2 2242 Flash Drive
P100-M Product Specifications
th
November 6 , 2014
Version 1.2
Apacer Technology Inc.
1F, No.32, Zhongcheng Rd., Tucheng Dist., New Taipei City, Taiwan, R.O.C
Tel: +886-2-2267-8000 Fax: +886-2-2267-2261
www.apacer.com
M.2 2242 Flash Drive
APM2T42P100xxxxAN-XTMX
Features:
Compliance with SATA Interface Temperature ranges
Serial ATA Revision 3.0 Operating:
SATA 6.0 Gbps Standard : 0C to 70C
ATA-8 command set Extended : -40C to 85C
Backward compatible with SATA 1.5/3.0 Storage: -40C to 100C
Gbps
Supply voltage
Capacities 3.3 V 5%
8, 16, 32, 64, 128, 256 GB
Power consumption (typical)*
Performance*
Active mode: 1,730 mW
Interface burst read/write: 600 MB/sec
Idle mode: 295 mW
Sustained read: up to 520 MB/sec
Connector type
Sustained write: up to 180 MB/sec
75-pin SATA-based M.2 module pinout
Flash Management
Form factor
Built-in hardware ECC, enabling up to 72
M.2 2242 form factor
bit correction per 1K bytes
Dimensions:
Wear-leveling
42mm(L)x22mm(W)x3.75mm(H)
Flash bad-block management
S.M.A.R.T.
Shock & Vibration**
Power Failure Management
Shock:1500 G
ATA Secure Erase
Vibration: 15 G
TRIM
MTBF: >2,000,000 hours
NAND Flash Type: MLC
SATA Power Management
Device Sleep mode (optional)
RoHS Recast compliant
*Varies from capacities. The values for performances and power consumptions presented are typical and may vary depending on flash configurations
or platform settings. The term idle refers to the standby state of the device.
**Non-operating
1
2014 Apacer Technology Inc. Rev. 1.2