RoHS Recast Compliant M.2 2242 Flash Drive SS220-M242 Product Specifications October 19, 2017 Version 1.4 Apacer Technology Inc. 1F, No.32, Zhongcheng Rd., Tucheng Dist., New Taipei City, Taiwan, R.O.C Tel: +886-2-2267-8000 Fax: +886-2-2267-2261 www.apacer.com Features: Compliance with SATA Interface Temperature Range Serial ATA Revision 3.1 Operating: SATA 6.0 Gbps Standard: 0C to 70C ATA-8 command set Extended: -40C to 85C Backward compatible with SATA 1.5/3.0 Storage: -40C to 100C Gbps Supply Voltage Capacity 3.3 V 5% 1, 2, 4, 8, 16, 32, 64 GB Power Consumption* Performance* Active mode: 570 mA Interface burst read/write: 600 MB/sec Idle mode: 85 mA Sequential read: up to 520 MB/sec Connector Type Sequential write: up to 455 MB/sec 75-pin SATA-based M.2 module pinout Seq. read QD32: Up to 530 MB/sec Seq. write QD32: Up to 445 MB/sec Form Factor Random read 4K: up to 79,000 IOPS M.2 2242-D2-B-M Random write 4K: up to 80,000 IOPS Dimensions: 42.00 x 22.00 x 3.60, unit: Flash Management Shock & Vibration** Built-in hardware ECC Shock:1,500 G Global Wear Leveling Vibration: 15 G Flash bad-block management Thermal Sensor Flash Translation Layer: Page Mapping S.M.A.R.T. Thermal Management Technique (optional) Power Failure Management Device Sleep (optional) ATA Secure Erase LED Indicators for Drive Behavior TRIM SATA Power Management RoHS Recast Compliant (Complies with 2011/65/EU Standard) NAND Flash Type: SLC MTBF: >2,000,000 hours *Varies from capacities. The values for performances and power consumptions presented are typical and may vary depending on flash configurations or platform settings. The term idle refers to the standby state of the device. **Non-operating 1 2017 Apacer Technology Inc.