RoHS Recast Compliant M.2 2242 Flash Drive SM220-M242 Product Specifications July 21, 2017 Version 1.3 Apacer Technology Inc. 1F, No.32, Zhongcheng Rd., Tucheng Dist., New Taipei City, Taiwan, R.O.C Tel: +886-2-2267-8000 Fax: +886-2-2267-2261 www.apacer.com M.2 2242 Flash Drive APM2T42SM22xxxGXN-4XTMXX Features: Compliance with SATA Interface Temperature Range Serial ATA Revision 3.1 Operating: SATA 6.0 Gbps Standard: 0C to 70C ATA-8 command set Extended: -40C to 85C Backward compatible with SATA 1.5/3.0 Storage: -40C to 100C Gbps Supply Voltage Capacity 3.3 V 5% 8, 16, 32, 64, 128, 256 GB Power Consumption* Performance* Active mode: 750 mA Interface burst read/write: 600 MB/sec Idle mode: 80 mA Sequential read: up to 525 MB/sec Connector Type Sequential write: up to 355 MB/sec 75-pin SATA-based M.2 module pinout Random read 4K: up to 76,000 IOPS Random write 4K: up to 43,000 IOPS Form Factor M.2 2242-D2-B-M Flash Management Dimensions: 42.00 x 22.00 x 3.60, unit: Built-in hardware ECC Global Wear Leveling Shock & Vibration** Flash bad-block management Shock:1,500 G Flash Translation Layer: Page Mapping Vibration: 15 G S.M.A.R.T. Thermal Sensor Power Failure Management ATA Secure Erase Thermal Management Technique (optional) TRIM Device Sleep (optional) SATA Power Management LED Indicators for Drive Behavior NAND Flash Type: MLC RoHS Recast Compliant (Complies with MTBF: >1,000,000 hours 2011/65/EU Standard) Endurance (in Terabytes Written: TBW) 8 GB: 13 TBW 16 GB: 27 TBW 32 GB: 66 TBW 64 GB: 126 TBW 128 GB: 277 TBW 256 GB: 305 TBW *Varies from capacities. The values for performances and power consumptions presented are typical and may vary depending on flash configurations or platform settings. The term idle refers to the standby state of the device. **Non-operating 1 2017 Apacer Technology Inc. Rev. 1.3