RoHS Recast Compliant M.2 2260 Flash Drive H200-M Product Specifications March 6, 2015 Version 1.0 Apacer Technology Inc. 1F, No.32, Zhongcheng Rd., Tucheng Dist., New Taipei City, Taiwan, R.O.C Tel: +886-2-2267-8000 Fax: +886-2-2267-2261 www.apacer.com M.2 2260 Flash Drive APM2T60H200xxxxAN-xTMx Features: Standard SATA Interface Compliance Temperature ranges Serial ATA Revision 3.1 compliance Operating: SATA 6.0 Gbps interface Standard: 0C to 70C ATA-8 command set Extended: -40C to +85C Storage: -40C to 85C Capacities 64, 128, 256, 512 GB Supply voltage 3.3 V 5% Performance* Interface burst read/write: 600 MB/sec Power consumption (typical)* Sustained read: up to 520 MB/sec Active mode: 2,250 mW Sustained write: up to 380 MB/sec Idle mode: 250 mW Flash Management Connector type Built-in hardware ECC, enabling up to 72 75-pin SATA-based M.2 module pinout bit correction per 1K bytes Form factor Static/dynamic wear-leveling M.2 2260 form factor Flash bad-block management Dimensions: 60.00x 22.00x3.88, unit: mm S.M.A.R.T. Power Failure Management Shock & Vibration*** ATA Secure Erase Shock:1500 G TRIM Vibration: 15 G NAND Flash Type: MLC MTBF: >1,000,000 hours RoHS Recast compliant (complies with 2011/65/EU standard) *Varies from capacities. The values for performances and power consumptions presented are typical and may vary depending on flash configurations or platform settings. The term idle refers to the standby state of the device. **Non-operating 1 2015 Apacer Technology Inc. Rev. 1.0